Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
By Mickey666Maus
— Last update
Other robots from Synthiam community
Drephreak's New Robot
Hexapod using EZ-B and Synthiam ARC-walking in 2 hours; easy programming, aluminum chassis, servos, sensors, planned...
Bhouston's Robotic Arm
Robotic arm overview highlighting design, capabilities and operation; creator available to answer inquiries and provide...
Djandco's Djandco's Wall.E
EZ-B Wall.e arm mod using small Arduino servos to retain clutch and deliver about 80 arm travel; neck servo planned.
is that the new part for in the head? i got the raspberry pi zero ordered. how much needs the charger send out,howmany volts?
5V you can also use the charger from you phone!
On the left picture you see the torso with the new part and on the right you can see the new part... This ist just for your information, so you can see how you will have to build the base!
The new part will hold some electronic components, like speaker neopixel an a Raspberry Pi3 or 4... But you don need this, you can also use your Laptop, or some people like the Latte Panda!
anyone around to try my robot on exosphere?
EzAng
hi mickey
witsh board do i need? red or blue?
thanks MRED is one you want
hi ptp
thanks red one will be.
ptp/mickey
does zoe use a camera? if yes link pls .i have finally ordered averything
.
if anyone is interested building zoe.here a link for the servo's.
servo's lx zoe
Hey Nomad, ZOE is using the Raspberry Pi camera...
https://www.amazon.com/Raspberry-Pi-Camera-Module-Megapixel/dp/B01ER2SKFS