Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
By Mickey666Maus
— Last update
Discover more robots
Imrisaac's Ez-B Project V3.0
Surveillance tank with EZ-B and XBee XSC900 for long-range control, Android IP camera streaming video, Vex treads,...
Fredebec's Another Wall-E. But French ;)
EZ-Robot Wall-E build: LIPO-powered mobile bot with EZ-B camera, MP3-triggered speaker, continuous servos, LEDs, cooling...
Moviemaker's Well, It Is Obvious That I Did Not Sell My V3,...
Frankenstein scrap robot from Sunshine, Omni-Bot, RAD and electrical box, voice rec/gen works on desktop, sensors and...
@EzAng I have done some research into ROS and this Robot operating system is a programming language, that can take quite a while to learn and become efficient. As I am a robotist not a programmer I do not have the time to start learning ROS. but who knows it my be usefull to learn.
Looks like Nomads printing is goin well,
EzAng
zoe says look into my eyes
and i will hypnotize you,haha lol
What kind of servos, electronics are you going to use?
EZang
the ones mickey recoment.see link in post #149
i also found this looks same servo's very cheap.
lewansoul servo's
What board are you connecting the servo too?
Mickey uses raspberry board, and python I believe
Iotiny or EzB4 are better, what will you use/
LattePanda running Arc is good
Wonder where Mr. ptp is in all this?
EzAng
for me iff possible ,the ezbv4 but i dont have a clue.:(
use the ezbv4 so you can get it to talk and all the rest
EzAng