This is the most updated model of the LEVi Platform
By jstarne1
— Last update
Discover more robots
Brw's New Robot And A Bluetooth Question
Troubleshoot Bluetooth pairing to a v3 board on Windows 7/8.1 or tablet, plus calibrate servos to 90 degrees for your...
Waynea's Tall Tower Light Controller - Ezb V4
Monitor 19 broadcast tower strobe lights remotely with EZ-B v4-easy relay integration, fault signaling and simple alerts...
DJ's Taught Jd How To Somersault
Don't try this at home!
first wheels have finished at 20 hours. The face didn’t turn out as smooth so I flipped and re sliced the next two wheels so the face is cleaner. I will know if the printer is skipping steps if it occurs agian, but I think we are good at the moment.
Man I’m loving that it’s printing now! So looking forward to this build
This is looking cool! Hope you have your lawn rabbit running around soon!
I have been timing my prints, I am at work this turkey day, but based on the time the 3rd and 4th wheel should be done printing. Cross my fingers they are perfect and I can start the printers again for the 5th and 6th.
I will update pictures either way.
Two wheels right off the printer, they look good. The next set are printing.
Next two wheels off the printer, just started the third set. Print time was 22 hours each.Good news, I sold a couple things out of the closet and purchased a couple Ender 3 Pro printers that I get for christmas
Yay I will update everyone on the last set of wheels today off the printer and switch to the treads and tracks.
Ok last wheels off the printer for this first buildnow I just started the rear tread print, we will see if that comes out good or if some changes in orientation need to be done.
if this rear tread turns out well I will move on to the next prepped print, the large tracks. I sliced them into 4 sections to fit into the print bed.