All Community Content
Take control of your robot's destiny by subscribing to Synthiam ARC Pro, and watch it evolve into a versatile and responsive machine.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Slamtec LiDAR driver that streams 360° scans to ARC NMS (Level 3, Group 1) for SLAM, mapping, and navigation with offset and COM configuration.
Featured
Taller humanoid with longer legs and arms, added head servo and rearranged RGB lights for increased movement and articulation.
question
Control Interface
Hi everyone, I think this gesture control device will be a great control interface for our EZ-Robots in the future. New Gesture Control Device
2
2 k
robotmaker |
question
Ez-B Connect To The 4 Channel Motor Control Unit For Rover 5
Hello, I have bought a rover 5 4 motor with encoder and the 4 motor driver Board. I have watch the video from DJ Sure with the HBridge (L298N) but I can figure how to connect the 4 motor driver . Here is the board : any idea of the IN1,2,3,4 and ENA ? Do I need to connect PVM CH1,CH2,CH3 and CH4 ? thank you for ypour help.
3
2 k
robohobo |
question
Solution Explorer Refernces Tutorial-19 Roomba No Ez-B ?
Tuesday, 19 March 2013 Good Morning EZ-SDK-C# Coders ! Microsoft Visual Studio 2012's Solution Explorer References reporting that Roomba Tutorial-19 has NO EZ-B ? What am I doing wrong ? I found these links on the EZ-Forum by D.J. Sures: By Right-Clicking and Opening Tutorial 19 - Roomba.csproj in EZ-SDK/C# Download, Roomba loaded into Visual...
4
3 k
DougPope |
question
Multi Board Support For Robosapien?
Is Robosapien only capable of working on board 0? Trying to add him to my multi-robot fleet but it doesn't look like I can use any other board #'s to run him? It will be a bugger to switch/re-program the current robot on board 0 so I can make him work. DJ thoughts?
6
2 k
Lumpy |
question
Switching Circuit Toturials For Digital Outputs
I design alot of circuils been electronic engineer and was look at are using using switching transistors to turn on lights...
56
9 k
robotmaker |
question
10 Kg Servo
Just a quick question. What does the 10 kg bit mean? Does it mean they can push a weight of 10 kg?
4
2 k
Jaychadw |
question
ARC Connect To The Pc's Generic Rs-232 Com1
Wednesday, 19 March 2013 Good Evening ARCs ! Feature Requests Rich, Thank You for Scripting Examples ! I had been requesting something like in previous EZ-Forum Posts. Friday, 1 February 2013 Good Morning Fellow EZ-Robot Scripters ! Is anyone available to colaborate on EZ-Scrpts and write simple Test Code Examples to become familar with Using the...
9
3 k
Rich |
question
Robotic Face
DJ, I recall seeing a post with a newer low cost acrylic cut robotic face/head. Maybe a Dagu product? Were you going to be offering those soon? The RoboticsSquared versions are nice, just pricey.
3
2 k
robotmaker |
question
Search Bar In The Forum
Hello everyone, I'm new to the site and robotics.i just learned about this product a few weeks ago, and am really excited.I'm going to buy a kit this week. I usually do a lot of research before i dive in, this site is very extensive in the amount of information provided. I wish there was a search function so i could easily find threads.kind of a...
2
2 k
derrick |
question
Omnibot 5402 Battery
Hi everyone, Due to being disoperational for over a year, my omnibot's battery has died. Does anybody know a good replacement? The dead one is a 6V 4Ah lead-acid with this form...
6
6 k
Lumpy |
question
3D Printer By Michael Joyce From B9 Creations
Hello All, Found this today. It seems that Michael Joyce, the guy who runs the b9robotbuildersclub, has designed his own 3D printer. For now it is on www.kickstarter.com. It looks like it will be a good one. Not sure how much it will cost. I hope that the price of 3d printers will come down to where I can afford one. I really could benefit from...
1
3 k
Rich |
question
A Little Off Topic. Claw Machine?
Ok, soo... i wanted to build something crazy, something totally different. The ideas in my head wouldnt let me sleep, i finally came up with an idea like no other, a working claw machine...mostly made out of wood, and that wood being a large majority of popsicle sticks. Farfetched? Yes. When i was little, i was fasinated by claw machines, ive...
7
3 k
jstarne1 |