All Community Content
Harnessing the power of ARC Pro, your robot can be more than just a simple automated machine.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
T265 VSLAM for ARC: SLAM-based mapping and precise way-point navigation, low-power tracking, and NMS telemetry.
Featured
Concept model scale mismatch: stacked components and an overly long neck.
question
Change Of Alias
Just wanted to announce that I've changed my Alias from @skater_j10 to my real name. I've been a long time forum member, even before I was employed by EZ-Robot, and still kept my normal...
13
4 k
Troy |
question
Freez Up
Every time I try to start camera, I get a "no dlls on waterfall message and the ez program locks up. anyone had this problem? confused Thanks, Dean
4
2 k
Steve1DH |
question
Trying To Get The Esc Into Reverse (Tamiya 101Bk)
Hi, I'am having trouble with my programming, I cant seem toe get the ESC to go into reverse. I'm a new user of the ARC software so it could just be me interpreting the code wrong but this is what I wrote to try and get the ESC into reverse. Move(D0, "stop") Movement_Wait("stop") Move(D0, "reverse")...
23
7 k
Bernard104 |
question
Eagerly Awaiting Ez-B V4 And Other Parts
Hello, I would like to introduce myself and get a bit of advice. My name is David. I have worked in IT for about 20 years and have purchased a robomow when they first came out and built a Talrik II in the distant past. Work got in the way of my building and the sprinkler system got in the way of the robomow, so I have simply been programming and...
4
4 k
Jason |
question
Roomba With Eyes & An Attitude
Just got a sound sensor from China, mounted it between two speakers, wired a couple of LED spinning lights (12vdc) to it and ran a couple of recorded...
13
5 k
irobot58 |
question
Roomba And A H-Bridge In Te Same Project
Friends... I'm trying to use an Irobot Create as a base for my next project. the case is that I'm using an H-bridge to control some motors that moves some other parts... I have two questions: How can I use two movement panels in the same project ? One for roomba and another for the other motors...? And, how can I choose a different port (other than...
4
3 k
tevans |
question
Boxbot
As my first project on robotics I am going to build boxbot but a little more upgrades on him like he will be able to talk he will have arms and maybe if can make him autonomous.Since I am a beginner in robots...
19
4 k
Mohamed.r |
question
Ez-Robot Revolution! Still On Track For July Shipping?
Is EZ-Robot Revolution! Still on track for July shipping? j
10
4 k
Mohamed.r |
question
Doc Motors/H-Bridge
Hello everyone. Am sort of a noob to robotics but I want to get my old RAD robot back to life, and for the two motors I know that it needs an H-BRidge. I saw the manual on how to connect it and all that fun stuff but one of my questions is, If I were to use an H-BRidge on different motors how would I know if the motors would run properly? I guess...
5
2 k
A.Bautista |
question
For Those Of You With 3D Printers
what settings do you like for: number of shells: resolution: infill density: Thanks, Just curious. Mel
15
4 k
MovieMaker |
question
Wiring In A Converter
Ok so in preparation for my V4 coming i'm buying last minute things. one thing that's needed is a way to convert the voltage from the board to 5 volts for sensors. This is what a...
27
7 k
Troy |
question
For The Ez-Robot Team
In the room with all of your 3D printers, are you printing in PLA or ABS? Thanks,
4
3 k
MovieMaker |