All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Azure TTS for ARC robots: generate natural, customizable neural voices for companion, educational, assistive, and entertainment applications.
Featured
Test robot on Steel Tec tray base with EZ-B, ping and IR sensors, pan-tilt camera, joystick control, LED and servo lift for obstacle clearance
question
Question Servo Moteur
hi the community, i have build JD,i have initialized the servo and i have tested JD it work a few moment and after the servo of the arm stop to work and they don't move i have...
6
2 k
vivion91 |
question
How To Use Two Ezbv4
hi in the pic you see two ezbv4 connected.con 0 has a program. how do i ad another program to conn 2 so they can work together.
2
3 k
Nomad 6R |
robot
Atarka's My Robot Won't Change The Worl
3D-printed Gremlin robot built with EZ-B v4/2 Developer Kit - body assembled, 75% printed; needs 8 servos to complete arms.
0
2 k
Atarka |
question
A.I. Mind Cloud Another Name For Terminator Skynet Lol
The debate at the end does not sound convincing enough to me,still needs a long way to go and using the cloud...
11
6 k
fxrtst |
question
Fine Tune Six's Servos - Six Hexapod
A new lesson needs to be added Fine Tune Six's Servos - Six Hexapod I looked at Fine Tune JDs Servos - JD Humanoid and did it for my Six, he works much better in movement and so on. j
8
4 k
Doron |
robot
Bravia's ?? Automation Project
Auto conversion of a standard car automating steering, clutch and gears with switch-to-AUTO, EZB controller testing, include safety cutoffs.
3
4 k
DJ Sures |
question
Interface Ez-B To A Trossen Robotics Hr-Os1 Biped Robot
My HR-OS1 HR-OS1 robot (Oscar) is connected to my laptop through a Windows 'Putty terminal' via WiFi. It has it's own IP address. The operating programs are open sourced C++, the platform is Linux. The controller is an Intel Edison interfaced to an Arbotix-Pro sub controller that drives the AX-12 Dynamical servos. There is a PS3 controller that...
15
5 k
Jerseylance |
question
Trouble With My Camera
I have 2 problems with my camera. 1. Orientation. I reassembled my eyes and I need to rotate the image 90 degrees. That is not an option in the drop down. I guess 270 deg and...
9
3 k
Perry_S |
question
Led Fade
I am trying to get the PWM going to fade an LED on my IOTiny, but it doesnt seem to be working. I have an IOTiny with 2 servos and camera. I am trying to get an LED to fade on and then off (repeatedly). I...
12
4 k
spurgco |
question
ARC Error At Loading Of Ippsp Libarary?
After update today causing error, ARC starts OK but as soon as I select a project or Add an item (Camera causes the error when selected), I get the following error: Error Title: Error at loading of ippSP library Error Comment: No DLLs were found in Waterfall procedure. After error flashes ARC freezes and then closes Worked fine prior update....
2
3 k
Rob_C |
question
Robot Volume
Wondering what people do if they want louder volume on their robot? I had some students record their voices, but when they added movements, the sound of the servos overpowered their grade 2 voice...
4
3 k
DJ Sures |
question
Dynamixel Communication
Hello, I am slightly confused about which protocol is needed to run dynamixel servos. I purchased a few ax12 a servos for lower strength applications, but I'm also interested in an mx 64 t or 64 r which appears to be either ttl or rs 485 protocols. Which protocol does port d5 on the ezb 4 use. I read some posts from old bit builder , he was using...
10
5 k
Jerseylance |