All Community Content
ARC Pro is your passport to a world of endless possibilities in robot programming, waiting for you to explore.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Gaming Mouse Pad
While programming your robot, these 9x7 inch personalized mouse pads deliver a smooth experience with a custom flair....
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
Real-time 2D mapping from Neato XV-11 360° LIDAR via GetSurreal controller; exports $LIDARDistance/$LIDARIntensity, configurable angles, color, zoom.
Featured
Celebrate Richard R and Bhouston's inMoov robots being published, showcasing recognition and inspiring more creators to get featured.
question
:(Not Totally Sure But I May H
:(Not totally sure but I may have burned out the first i2c port 1 below the camera port, I accidentally touched the first pin there with the negative wire from a digital port in the bottom left corner and there was a burn smell I quickly disconnected the battery and all seems to be working with the EZ4 ( I had a flashback from 2 years ago where I...
1
2 k
Dave Schulpius |
live hack
Botmatrix Side Stream 2
Finishing the ROB hack: determined effort to complete the ROB hack
5
2 k
JustinRatliff |
question
When I Program With Blockly An
When i Program with Blockly and the Program is finished the arm servos go crazy and do anything. Please help me. PS: If its important. I have a JD Humanoid
3
2 k
DJ Sures |
release
Beta Release 2019.01.31.00
Synthiam ARC beta adds a capability manager, emulator and firmware to make Arduino and Robotis boards act as EZ-B controllers.
3
3 k
3dGuy |
question
Let Me Ask: When I Program The
Let me ask: when I program the servo with Ez-script language, I need to program BLOCKly and can guide me how to create them?
1
920
DJ Sures |
question
Is It Possible To Use A Wall P
Is it possible to use a wall plug to power an EZ-B v4? Is one available for sale?
1
2 k
DJ Sures |
hardware
Opencr
OpenCR 1.0 ARM robot controller compatible with Synthiam ARC-Arduino firmware install, 921,600 baud, pin mapping, PWM & EZ-Script
0
12 k
hardware
Darwin Mini
ROBOTIS MINI for Synthiam ARC: 16 XL-320 servos, OpenCM9.04 controller, 3D-printable frame and Bluetooth/firmware setup tips.
0
9 k
live hack
Botmatrix Side Stream 3
Revisit a favorite project that's been on the back burner for too long.
12
2 k
Jeremie |
robot
Nomad's BATTLE DROID
EZ-Robot droid build with photos and videos; needs tuning for red-ball tracking and left/right turning, available for public use.
13
3 k
Nomad 6R |
question
Hello,I Am Working With A 3
Hello, I am working with a 3 phase speed controller for my robot leg project. In order to change direction of the motor I need to either send +5V to a pin or ground that same pin. Supplying the 5V in not problem but how can I use EZB to apply a common ground signal to that pin on command? Perry
3
2 k
DJ Sures |
question
Who Can Help
initalvexgrippertest.EZB I need A lil help with some programming. It's been a year or so since I've written anything. I'm trying to set up a simple test with 2 grippers. I can get them to...
14
2 k
RoboHappy |