All Community Content

Movement Pannel In Vb Express 8

hi all i have a form with a connect panel working ok i have Movement panel and want to know how to assign ports to it can anyone help with the code needed? Private Sub EzMovement1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles EzMovement1.Load EzB_Connect1...

Use A High Torque Stepper Instead Of Servo In Arms

@dj. Hey is there a feasable way to make a stepper motor perform the same functionality as a servo? I would like to have a small stepper inside the shoulder and elbow of the ombibot 2000. It's just a thought thanks

EZ-B WIFI Connect

Hi There DJ sures, I'd gave myself a present the Wifi module TLG10UA03. Yesterday it came with the postal I just configured it gave it my wifi ssid and password and a static ip. Tested it and connected it to the EZ-B. Powered up the EZ-B and wanted to connect the ARC. But ehm.... ehm... ohh. How can I connect

Can I Use The Function Of Roboy?

HI! I have finished my Spy robot.. I will post here the new photos of my robot... But now.. I want to make a ROBOY... I have seen the function of roboy in ARC, but I have not seen any tutorial, video or example about that... I want to know if ROBOY is working beacuse in tutorials say "Coming soon" Thanks!!

Tutorial 11 - Color Vision Tracking Problem

Hey u all, I'm doing a project on autopilot with the ARDRONE, I'm try to run tutorial11 but somehow it does not work for me. Apparently the call to startcamera is not working good. Someone have an idea what could solve this? It's really urgent. A huge thank you Shiran

Firmware Question

Dear Dj Can You Explain To Me About How Do You Write C# Programing For Micro Controller And Run C# Command On This?? Is This EZ-B Micro Controller PIC18F97j60?? That Is Related To Firmware??Or EZ-B Software??Or BlueTooth Remote?? Can I Use Any Lib For Programing?? For Example OpenCV & A.Forge FrameWork. Plz Give Us Tutorials For Develop...

Firmware Upgrade Reboot And Slow Blink

Hi I just turned on my EZB and I have to upgrade my firmware. I connected to the firmware updater Started the bootloader upload It says "firmware loaded. reboot EZ-B" So I pull out the battery and put it back in Now the board started but the large LED is pulsing slowly with a fade effect. What's going on? Did the firmware update succeed?...

Map() Feature

Hey DJ, Is there a map feature in ARC? I have a voltage divider setup to measure the battery voltage and i would like to show the voltage on my Omnibot's LCD. Now the value is 0-10v in stead of 5v so i would like to map the ADC value from 0-255(is 255 the max value of the EZ-B?) to 0-10v.

Usb->Serial Adapter

Hi DJ, For my omnibot, i am using a USB to Serial converter from SparkFun. However, since the newest firmware update, i haven't been able to connect. I've tried multiple converters but all fail... Did you change anything?