Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Compact Lynxmotion Smart Servos with position feedback, safety features and UART TX/RX for Arduino/EZ-B v4; scriptable temp, load, load-dir and ping.
Featured
Hex coaxial drone with 12 props and 15 lb thrust, 3D-printed frame to lift a WiFi antenna and camera for extended robot range via beacon tracking
question
G'day Everyone....Another Wall-E
Hi Everyone, I'm Richard(Rich) and my daughter is Phoebe That's right myself and my daughter are building a scale Wall-e from scratch, after she got the old...
25
7 k
mereyes |
question
PS3 Remote Connectivity
Hello I am a 13 years old and new to the EZ-B concept. Along with other things, I need to ask a few questions relating to joystick connectivity. I was ready to buy a wireless controller for the EZ-B and then realised that I could use one of my wireless PS3 remotes. I plugged it it using the charger cord and started up the ARC. When opening the...
18
4 k
Creativita |
question
Fan
DJ, Do you have the little 5V fans for sale yet? If not will you soon?
5
3 k
hoolagen1 |
question
Wireless Speaker
Thought I'd put this in general discussions so every one might see it. I found a small wireless speaker on ebay. It is called the innovage. its 4-1/4 in. wide x 5 in. long x 1-1/4 in....
10
4 k
thetechguru |
question
Will Part Of My Wiring Diagram Work?
Hey guys, I was just wondering if someone could look over my wiring diagram. Im not electronic savvy and Im afriad I might blow a fuse or burnout...
4
3 k
jstarne1 |
question
Xbox 360 Wireless Controller
I've got a question . I'm trying to hook up an Xbox 360 wireless controller. I have the transciever and all. When I try to connect to it , it won't conect. I went to the microsoft site and did all the trouble shooting............................... I keep getting an error message that the drivers did not load. Is there somewhere I can get updated...
2
2 k
Robotz012248 |
question
Increased Ping Sensor Range And Calibration
Thanks DJ for increasing the sensitivity of the PING sensor! Whatever magic you did with the code has really made a huge difference. I do have a few questions however with how the sensitivity increase has managed to affect the Controls. Now the ping sensor shows 255 when nothing is in front of it. My sensor starts to pick up objects at about 70...
5
3 k
thetechguru |
question
Silence Motors, Gears And Servos. Sound Deadening
Some of use don't want our robots loud enough to.get a noise complaint from the nieghbors if you stay up too late...
5
12 k
jstarne1 |
question
Ez B Keeps Dropping Its Connection(Help!)
Hi all! I am working on my Talon One but as soon as i hook up all the servos, the Ez B dies or sometimes loses connections. May i know what could be the problem? I tried testing out the servos one by one and they all work. but just that when i try to hook up all the servos at once, the EZ B drops dead. Could it be drawing too much current for the...
11
3 k
iskandershah |
question
Insert Blank Problem
Hi DJ, Since I installed the latest version of ARC, it is no longer possible to properly use the insert blank option in voice recognition configuration. That creates some problems since this option is essential in editing commands. Would you please help?
3
2 k
nicolson |
question
Can I Place A Modified Servo On The Wall-E Wheels Instead Of Body?
Hello, I see most people attach the modified servos to the wall-e body then attach the "wheels" to the servo" can i attach the modified servo to the wheels and then attach the wheels to the body? have some ideas in mind, and wanted to see if anyone has experimented with this? thanks,
7
3 k
hoolagen1 |
question
Omnibot 2000 Finished Bleached Results
My favorite part is I perfectly maintained logos on the front , very clean looks brand New all the way around. This is the results if salon...
1
3 k
jstarne1 |