Robot Building Questions

Another Very Cool Robot

bartender robot that can mix drinks ,using the E-NOSE sensor it detects the acohol by the smell and mixes the right drink and uses KINECT for navigation and localization

Robot Combat League

Ive been itching to talk about this. My friend Mark Setrakain, was approached by a production company with deep pockets to see if he could create 8 foot humanoid robots that battle in the ring. Very much like a recent film with Hugh Jackman. Mark is probably the best animatronics engineer in the world. SyFy is showing very quick clips of the show...

Fred , I Have Uploaded The Code For Marti

It is not perfect. But, it certainly works. I need to fine tune it. Under MainMarti in the cloud under completed robots.

Camera Question:

Hello, I took apart the camera, and soldered the wires in it as the video explained. I understand the black, and red wire are for power. Is the white wire for video to go through the EZ board so the video will go through the bluetooth to the computer, or do I need to keep the wireless camera card in my usb port of the computer. If I do, then what...

Floor Mapping?

anyone know how set up floor mapping any help be great . thank.s cory

Using 2.4Ghz Camera's Communication Module On The Ez-B

Hey, I've noticed the bluetooth communication in the EZ-B has a certain low range, it stops working at about 5 meters, but the camera has a very large range. I'm wondering, is it possible to use the camera's communication module to communicate with the EZ-B? I understand I'd have to do some programming to get the data off the USB, but in the...

Simple Vb6 Code For Usb-Wired Video Camera.Extremely Simple

The following works with windows7 x64 w/VB6, LogitechC90 USB VideoCam Make sure the Video Camera is installed: double check it using EZB. START A VB6 project ADD 4 buttons and rename them: cmdCapture, cmdClose, cmdExit, cmdVideoFormat ADD a picturebox: picture1 Select from MENU.PROJECT.ADDMODULE (this creates and adds a .bas file to the project)...

Would Like To Purchase 1 Or 2 Ez-B Micro-Controller Chips

Teusday, 29-Jan-2013 Good Morning EZ-B Sales ! In one of your Forum Replys, you offered to sell an EZ-B Student a replacement IC for his EZ-B. As of this morning, my EZ-B is working GREAT, capable of controlling each of my iRobot Series-400's. All of your Roomba Code works perfectly on the first try, But None of my SendSerial Scripts talk to any of...

Can The Interface For Robosapien Work For Robosapien V2 Model

DJ i have a few robosapiens v1 and few robosapiens v2 and want to know if the commands work for both and on robosapien v2 version it has a built in camera are will able to access it