Robot Building Questions
Synthiam Credit
Your Credit: $0.00
Lower the cost of Synthiam products by contributing to the platform and community.
Recent Robot Skills
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with hardware-timed PWM,...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for real-time...
Hitachi-LG LDS Lidar
Hitachi-LG LDS 360-degree LiDAR driver streaming scans into ARC NMS for obstacle detection, SLAM use, Arduino...
Featured
Fullscreen overlay video player controlled by ControlCommand: play/pause/resume/stop; ESC cancels playback and locks new playback until unpaused.
Featured
Control JD Humanoid in Synthiam ARC with Stickman JD: 3D joint dragging, rotate view & floor grid, works with EZ-B emulator for offline scripting.
question
New 3D Printing Category
Many of you have been asking for 3D Printing to have its very own section. Well Here it is! I'm very excited to see what amazing Designs everyone has been creating and...
19
5 k
Antron007 |
question
Getting Ready To Buy Kit, Questions About R2d2 Conversion
Hi folks, I'm getting ready to pull the trigger on an EZ Robot kit. I saw DJ Sures performed an R2D2 conversion at the Calgary Expo earlier this year. I have one of these Hasbro R2D2s on hand and want to convert using the EZ Robot kit. Does anyone know if Sures leveraged any of the existing R2D2 electronics (besides the drive motors)? Or, does...
11
4 k
Dunning-Kruger |
question
A Question About Hacking A Wheel Chair
Has anyone ever hacked a wheel chair controller? it seems like it would make sense or is it better to use a bridge can anyone shed some lite on this ? 2 10 watt 24 vdc motors
23
12 k
Putt Putt |
question
Wtd: Ezb3 Board
Anyone have an EZB 3 board they want to sell? Thanks R
10
4 k
vhs896 |
question
Ez-Robot Wallpapers
Hey Guys, Our media guy Jason made a couple of EZ-Robot wallpapers today. What do think of them?
13
4 k
Rich |
question
3D Printed Fingers
hi everybody wanted to show you the 3d printable finger unit i created. i will make .stl available somewhere for everyone to take a crack at mounting servos on it if they like. there...
5
3 k
RR333 |
question
Dimensions Of Detected Object
Hello and first of all, scuse me for my bad english. I will try to explain my question: When the robot detect a face, or a color, i can see on the screen, a bigger or smaller square. The biggest is the square, the nearest is the face (or the colored object). How can i in visual basic have the square dimension? Thank you very much. Ema from Italy.
3
3 k
DJ Sures |
question
Multitrack Recorder. Think About!
Hi DJ, (and guys!) Do you think it is possible to create a multitrack recorder control? Think about how useful that would be for animatronics! We could...
9
3 k
Antron007 |
question
Ez Robot Is Now Listed In Robotshop.Ca!
Roli, Six, EZB4 and the developer's kit have just been added to RobotShp.ca... And the best news is new stock delivery date is listed as Feb...
28
5 k
jdebay |
question
Ez-B Hardwired To Pc?
While Bluetooth is the standard for connecting a PC to the EZ Board and V4 is on the way (WiFi) is it possible to hardwire (USB, etc) for those builders who have room for an onboard PC. Perhaps there is a way to emulate the Bluetooth connection thru hardwire/software? I know there is a Type2 with a stronger signal but that is only one part of the...
16
5 k
rgordon |
question
Build Manuals
Hi guys, Obviously the ARC software includes the STL files for 3D printing the parts to make the Revolution robots and I have made good progress with JD over the weekend. Although the files (eg...
6
2 k
Antron007 |
question
New Video
the new video wont play on you tube due to copyrighted music by an emi artist Moby's album "Play" was released under public domain so if you're ever in need of some decent free music you can always use one of those songs. Not to plug Moby but it is just something I know from my advertising days.
2
3 k
Antron007 |