Robot Building Questions
With ARC Pro, your robot is not just a machine; it's your creative partner in the journey of technological exploration.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Gaming Mouse Pad
While programming your robot, these 9x7 inch personalized mouse pads deliver a smooth experience with a custom flair....
Recent Robot Skills
The Better Navigator
Hector SLAM-based navigator for ARC NMS: maps with lidar/depth, saves waypoints, plans paths, fuses pose data...
Dynamixel
Open-source ARC plugin to control Robotis Dynamixel servos (XL-320, AX-12, XL430) via EZ-B, Arduino or...
Inverse Kinematic Ar…
Configurable inverse/forward kinematics for robot arms, define joints and bones, move end effector in cm with...
Featured
Read DHT11 temperature and humidity on Arduino (signal pin 4) using EZ-Genuino_DTH11_Uno firmware; exposes $Temp and $Humid variables.
Featured
Revolution modular robot platform expands EZ-Robot with EZ-B v3 controller, 3D-printed prototypes, tutorials and a global maker community.
question
One Pot For Two Devices For Feedback?
What do you all think? Is it possable to use one pot for two devices for feedback? I have one motor I have one pot attached to it so I can send...
20
6 k
Dunning-Kruger |
question
Dingbot And Other Small Classics
My mind needs a break from my big robot rover. Here is a photo of two classic Tomy's I have, the Dingbot and the dustbot. They're pretty small (though the...
0
3 k
mdeming1 |
question
Ez-B Not Getting Power, Regulator Heats Up
My ez-b is no longer turning on, I believe the regulator nearest to the LED doesn't work, it heats up a lot, how do I go about replacing it? Also my bluetooth module doesn't work anymore, do you know where I could find one of those? Oh and do u know how i could bypass it with regulated 5v to get it working right away thanks
8
2 k
tevans |
question
Intel Open Source 3D Robot
Caught this article last night. Seems a bit old but I would love to have one of these once the release the 3d stl files. Honestly cant wait to see what there going to...
5
3 k
Steve S |
question
Ebay Robots Ready For Ez-B
Here is a RAD that is perfect to hack with the EZ-B it's only 30 bucks plus 22 bucks for shipping. Linky
10
4 k
Mohamed.r |
question
Ezb V.4 Specs
Since the EZB is now starting to ship to some of us could we get a few specs. Things like. How many volts for input. I thought I read that there is not a regulator on it so what you put in is what you get out? Is that true? What would the best input voltage be, I assume 5 volts for the servos? How many amps does it put out safely? Any info would be...
5
3 k
jdebay |
question
Can't Find Control Command Clearlastglyph
What would be the exact syntax to clear last Glyph befor reusing it?
8
3 k
dicka |
question
Anyone Already Have The Old Jd Or Six Stl Files?
Anyone have the old JD or Six stl files? I know they are old but I would still like to have the "original" JD sitting on my desk at work.
8
3 k
Rich |
question
Switch On H-Bridge?
Hi, On the 2.5A Motor Controller that is sold on the EZ-Robot store, there is a pushbutton switch labeled "S1". It seems to toggle an LED that is labeled "5V...
6
4 k
Rich |
question
New To Robotics
Hi, I'm new to robotics and have an EZ robot on order. It won't ship for a few weeks so in the meantime I figured I would learn to use the EB software. I get the basic idea from watching the tutorials online. Is there a better way to get a head start? Any advice would be appreciated. On another note, I am especially interested in educational...
3
2 k
Rich |
question
Magnet Interference?
Just checking if any one can tell me if a magnet/s would cause any interference with the EZ-B? Version 3 or 4? My project, has several small 1/8 inch Neodymium Magnets (non moving) (qty 3) with in 4 inches of where the EZ-B will be placed.
3
3 k
irobot58 |
question
Custom Wall-E
I have been debating for a while on building a custom Wall-E. It will not be a full scale one and I have not decided on the exact scale. I am starting to look at parts and materials including the tracks to see how feasible it will be. Do anyone know of any triangular track system other than the Lynxmotion Johny 5 tracks otherwise I will most likely...
0
2 k
Darathian |