All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Example NMS Level #1 navigation skill showing subscription to combined scan+location data, displaying position and scan info; source code included.
Featured
Robotic arm built with EZ-Bits to assist feeding users, project files available on Synthiam cloud for replication and customization.
question
Spotmini
All electric, 65lbs/30Kgs, 90 minutes they demo the robot inside a house cool tech
2
3 k
Mickey666Maus |
question
Question: Using Dht11 Humidity & Temperature Sensor
Hello everyone, I am a newbie in this community, and just joined in the last month. It is a honor to start a conversation here in the forum. Currently, I am trying to integrate DHT11 into my robot. I am not very sure about how to apply this single-wire two-way serial interface with ezb v4. Could everyone please share his/her knowledge about this...
8
5 k
Rich |
question
Adjusting Continuous Wheel
Hi people, I need some help here to adjust my continuous wheel I got with adventure bot. When it runs on tile or concrete floor it works just fine. When when it run on carpet floor, it can go forward and backward, but when I try to do a left or right turn, the wheel appears to slip and couldn't turn. I'm thinking of doing a adjusting the torque but...
9
2 k
Philip W |
question
3D Head
To my robots people I would to make a JD head a bit larger than its original what can I do.....
2
3 k
Jerseylance |
robot
Macsuco's Teachable And Trainable Robot
Teachable robot with empty memory learns movement, voice, color and size in staged aging using learning firmware to act like a human of that age
0
2 k
Macsuco |
question
Tic-Tac-Toe Plugin
DJ, Would I be correct that when playing this game of Tic-Tac-Toe that you are not really playing against the robot but against the PC ARC Program? I can have the robot disconnected and the game plays on. Works no matter if you are connected to the robot or not? Also noticed that sometimes the program locks up when it is the robot/computer's turn...
11
4 k
ptp |
question
Gas Sensor Used With Ezb V4
Hello everyone, I am considering using sensors which can show the quality of air, like detecting any toxic gas. Does any one have any recommendation? I have two requirements: 1. Use ADC ports. 2. Decent performance. Right now, I am applying MQ135 sesnor, which does not impress me much, with its poor performance. Also any tips about using a gas...
2
2 k
robocen |
question
Protection
My JD Humanoid is shared a lot with different people at different places. During workshops with kids, inspiration sessions with companies and during the rest of the time at a publicly open space where anybody can discover the robot by themselves (Permanent Future Lab, a place where tech is being shared). Things brings challenges along. Especially...
5
2 k
Samir Lahiri |
question
Arduino/Duinotech 8X8 Led Matrix
Hi, I'm new to Ez Robot and new to this forum. Here in Australia, we have a electronics suppler called Jaycar who supply an Arduino equivalent called "...
8
5 k
stevep |
question
ARC And Third Party Servos
I tested ARC with hitec servos, and discovered ARC is not able to make them move in their full rotation range, largely exceeding 180. The full ARC 0-180 range produces a rotation of about 163. And , of course, no corrispondence between the degrees set and the actual servo position. I was told by DJ Sures, that ARC was made for ezb servos, and...
8
4 k
DJ Sures |
question
Hexapod Questions
Hello! We are a hungarian father and his son (sorry for my poor english). I bought a EZ-Robot Hexapod for my son, who is interested in it. I bought it from ebay. Unfortunatelly the...
20
5 k
DJ Sures |
question
Getting Started With Ezbv4
very trivial question . I have received the ezb today.Never used it. I found no information saying if power plug is center pin positive or not , and if the voltage of...
24
6 k
leonardo46 |