All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Capture a robot skill's display and stream selected area as video to a configured camera device with FPS and live preview crop.
Featured
RC-xd Airsoft Droid: modified Omnibot on a rad 2.0 base with dual automatic airsoft guns and EZ Cam for Mech Wars, built for Team EZ Robot
question
Dynamixel Communication
Hello, I am slightly confused about which protocol is needed to run dynamixel servos. I purchased a few ax12 a servos for lower strength applications, but I'm also interested in an mx 64 t or 64 r which appears to be either ttl or rs 485 protocols. Which protocol does port d5 on the ezb 4 use. I read some posts from old bit builder , he was using...
10
5 k
Jerseylance |
question
Image Overlay On Twitter Image
ok, i cant seem to find what i am missing.. I have setup the camera with motion and face tracking. I have added overlays on the camera config, and linked it up...
1
2 k
DJ Sures |
question
New Dynamic Speed When Turning Does Not Work For Roomba Controls
When using the Roomba control panel, the new Dynamic Tracking Speed (spelled...
3
4 k
DJ Sures |
question
Motor Controller For 24V Dc Motor
I've been reading up and not quite sure which is correct for me, sabertooth, kangaroo, hbridges, and that easily work with the ez-b. It seems there are a...
12
6 k
Bravia |
question
4-In-1 Orientation Sensor Coming Soon?
Confused... I have four 4-in-1 Orientation Sensor that match, exactly, the PCB depicted in the DYI picture marked "coming soon". I...
8
3 k
Doron |
question
Auto Position Action In Random Modus
Dear EZ-Robot Team and Fans, If my camera notice something.. I want to play an action from auto position.. but not every time the same.. I want a...
2
3 k
Asimo |
question
Am Confused Making Ed Mech-Jd
am making a new ez robot.the ed mech chooter but with an jd styl. as am looking the config how to build it,i see diff asigments from ports. one says d0 is left...
5
3 k
DJ Sures |
question
Camera Movement With A Continuous Servo
In my R2 build I put the camera with a 180 servo that controls the up and down in the radar eye. I'm using a continuous spin servo to spin the dome and would like the camera to control that servo for side to side tracking, but in settings it appears that it has setup for a 180 degree servo. I tried the min/max with the continuous spin servo but it...
7
3 k
DJ Sures |
question
Raspberry Pi
will this work with ez https://www.raspberrypi.org/faqs
10
5 k
jstarne1 |
robot
Knightster530's I Would Love To Make 4 Or 5 Ft
4-5 ft robot that knows the New King James Bible, teaches about God, Jesus and the Holy Spirit, and answers any Bible questions.
0
775
Knightster530 |
question
Ezb - Uart 0 Not Working
DJ/Jeremie EZB4 v2 (MXCHIP) UART 0 is not working please advise ? Connection Information: Wiring: EZB4 v2 TX - Orange RX - Yellow GND - Green SparkFun FTDI Basic Breakout...
15
5 k
ptp |
question
Imoov Eye Upgrade
I plan on trying these out once my Halloween work is completed. Has anyone tried them? https://youtu.be/cBF2Chm6mJA
3
3 k
3dGuy |