All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
ESP32/Arduino EZB firmware with MPU6050 support: provides accelerometer angles and Yaw/Pitch/Roll gimbal servo values for stabilization and scripting
Featured
Custom Revolution Six robot dances after 3D printer and wiring fixes, ready for scripted dance routines.
question
Right Ankle Servo Calibration
I am just working with the JD Humanoid for the first time today, I am able to connect the robot with my computer. Through the process of calibrating the servos,...
3
2 k
mcriscitello |
question
Using Bing Speech Recognition With ARC Speech Recognition Control
I've been having a fun evening trying out the cognitive service plugins this evening for...
8
4 k
DJ Sures |
question
Telepresence Robot Idea
I would like to have my robot be controlled over internet with a Vr type Headset. Like one that you set the phone inside. I would tie the headset phone motions to the...
15
5 k
faengelm |
question
Radar And Rgb Dont Work
i read the tutorial tree times,try all kinds of stuff.bolt rgb and ping sensor dont work.i use an original roli ARC.the ARC disconnect when trying to use one of the rgb,got 2...
16
3 k
Nomad 6R |
question
Newbie Needs Help With First Robot
Hello, I've never posted in any forum before, so I hope I'm doing this properly. I've designed, 3D printed and assembled a robotic Gremlin using the EZB...
19
6 k
Nomad 6R |
question
Compressorhead
I saw this vid on another Inmoov site. For me, it is one of the best bot videos out there. The whole concept is wild, over the top, and just my style.
4
3 k
RoboHappy |
robot
Smarty's Synthiam Arm
EZ-Robot Arm executes user commands to perform tasks, ideal for hands-on robotics projects.
14
6 k
bumsteadsean |
question
Tomy Omnibot
have in my possession a Tomy Omnibot for sale. Please contact me at 661-470-7815. [email protected].
2
2 k
DJ Sures |
question
Dead Battery
I have an AdventureBot that will not charge. Tried two different chargers and two different outlets. Tried charging for over 24 hours. Tried connecting and received a diagnostic report which showed N/A for voltage. I have a Roli and the same charger charged the battery in the Roli. I am assuming it is the battery that is bad in the AdventureBot. We...
3
2 k
bsletta |
question
Servo Shutting Off Ez-B
Hello, I have just bought some metal gear servos for the robot I am working on. When I go to plug in the servo into the EZ-B it just causes the board to keep shutting down. Is it drawing too much voltage or current? It is these two Kookye Servos: www.amazon.com/gp/product/B01I6AWBJI/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
8
3 k
Steve G |
question
Compatible Ssc-32 Controllers
I was reviewing the threads discussing the use of a SSC-32 controller to add an additional 32 servo (analog) ports. My question is if there are any specific...
4
3 k
bumsteadsean |
question
Power And Temperature
I am using scripting to get power and temperature for 2 ezb's. I have noticed that even if I disconnect the 2nd EZB, my script still shows power and temp for it even though it is no longer connected. I think there may be a bug in Ez Robot. Here is my script. $cputemp1 = 0 $cputemp2 = 0 $cpupower1 = 0 $cpupower2 = 0 $cputemp1 = ((GetCpuTemp(0) *...
2
2 k
dbeard |