All Community Content

The Stalker Robot

Greetings from Norway! Love your work DJ Sures! I'm planning to build a robot that follows a user, I'm just wondering if there's a way to use the EZ robot controller? I need something that measures distance and direction between the user and the robot, and excludes other users that the robot only follows one user. I'm a student studying Electronics...

Max. Voltage

What is the maximum voltage the EZ-B can take? I have a 7.2v accu pack here that i want to use with my EZ-B but don't know if it will work

TLG10UA03 Drivers

Hey all, Would anyone happen to have the drivers for the TLG10UA03 wireless module? Specifically those for the virtual COM driver. Cheers, Thomas

Facial Tracking From SDK

Hey DJ, I was wondering how to call on facial tracking from the SDK (in either VB or C#)? Thanks mate, thomas

Servos Vs Motors

I recently gutted my daughters Hot Wheels Barbie chopper. I ended up with two 12 volt motor/gearboxes, wheels and a battery. The gearing is rather tight, as the chopper was designed to haul around a 35-40 lb child. When you speak of servos, is the term "motors" interchangeable with that? Will the EZ Board allow for direct hookup, or will...

Bluetooth Connection Problems

I was testing the EZ-B with my joystick and everything was working brilliantly. I then needed to leave the room and without thinking I removed a battery from the battery pack without disconnecting the EZ-B. When I returned and placed the battery in the battery pack the bluetooth light (which is on top I think) wasn't flashing. I am now unable to...

Re-Using Components

So I have a few servos and things which I have taken from various toys. I had the intention of connecting them to the EZ-B board. However they are not 3 prong connectors. They have 2. I'm not entirely sure what each of the 2 wires does, but they are definitely connected to servos. I think they are grounded already. I attempted to connect them in...

Status LED Fail

Hey! Yesterday i was driving around with my robot powered by EZ-B when it got stuck in forward (not the software but the ez-b itself) and i couldn't stop it, i rebooted and it got stuck in turning. Now i powered it up but the Bluetooth module light won't come on, then it finally came on and everything works as normal but the status led doesn't...

Max # Of Servos Without Jitter

I am new to this and I havent my ez-b yet to test it. Ive researched online and discovered that some boards are capable of many servo connections, there is a problem with efficient software routines to prevent jitter due to # of servos and other processes in the programming. I intend to use 14 servos and prob all the DIO. DJ, do you think this will...