All Community Content
Synthiam Credit
Log In
Earn Free Credit
Share your robots, answer questions, and help others — earn credit toward ARC Pro, AI credits, and robot swag.
Exosphere
What is Exosphere?
Drive Real Robots, Anywhere
Remotely operate robots around the world or add live telepresence to your own build — straight from your browser.
Discover Exosphere
Synthiam Swag
See All Swag
"I build robots" Hoodie
Recent Robot Skills
View All
Feetech Serial Bus S…
Control Feetech SC serial bus smart servos via EZB UART or PC COM port with ARC virtual ports,...
Feetech RS485 Servo
Control Feetech serial bus smart servos via EZB UART or PC COM port in ARC using virtual ports...
Total Speech Recogni…
Offline Windows speech recognition with open dictionary, confidence filtering, and scriptable phrase...
Featured
Control UBTECH Alpha UBT-12HC smart servos via ARC using EZ-B v4/IoTiny UART, assign virtual ports, set baud, custom bits and position mapping.
Featured
EZ-InMoov robot head with Synthiam 3D-printed parts and EZ-Robot electronics, programmable via Synthiam ARC for AI-driven talking and learning.
question
Speech Recognition
So i am having a few issues using speech recognition module, i open ARC and goto speech recognition, when i start it i get an error saying that there is either no listening device or my operating system is not supported, i am running windows 7 64bit and my pc does have a mic as i can use the windows 7 built in speech recognition, any ideas ? Thanks...
24
5 k
Hazbot |
question
Changing Com Ports In Firmware Update
I went to update the firmware on ARC today. When I opened up the update firmware window the com port had changed to COM 31. It should be COM 3. I can highlight it in the drop down but can"t change it. How do you change the COM port in the firmware update window?????? Guess I 've forgotten how to do it. Thanks, Lloyd
7
3 k
Robotz012248 |
question
Also About Using H-Bridges
if you have a 4 wire h bridge can use a simple circuit to convert it to a 2 wire pwm and control (fwd,rev) 4 wire h-bridge is full bridge using 4 mosfets,2 wire bridge...
2
3 k
robotmaker |
question
Ping Sensor Problem
The Ping Radar and object detector are on our BOB Robot and it starts working Fine with my Digital Ports - Then the Ping just drops out. The Object dedector sticks at the max distance and there are no red blips coming up on the Radar. I'm also running a servo for the head rotation tied in with the ping. Could this be due to low voltage to the EZ-B...
8
3 k
Hazbot |
question
Bluetooth
Hi DJ, Just a little question out of curiosity: At what baud rate is the bluetooth module configured?
1
3 k
winstn60 |
release
Release 2012.05.24.00
Synthiam ARC: Wii Control stops without A button and is faster; adjustable script-help panes for joystick, speech and Twitter; servo 'Center' button
11
5 k
Niek |
question
Mp3 Trigger - Set Volume
Hi DJ, Hope your having fun at Maker Faire. I finally got my MP3 Trigger in from Sparkfun. It's up and running. A question, maybe I'm missing it in ARC or it's not possible. 1) Is there any command line to set volume for the MP3 Trigger? All I can find is the drop down on the MP3 Trigger control panel. I do not want to run external triggers to...
9
4 k
Lumpy |
question
Glyph Question
Ok, I saw the videos on the robot recognizing the Glyphs. Cool. But, what I did not see was a video or tutorial teaching how to TRAIN the robot to recognize the Glyph. Please forgive me for not seeing this. I am sure it was there. I see where to check the box to recognize a Glyph. But, how do you train it? Also, I would like to recognize pictures...
2
2 k
MovieMaker |
question
Mps Gas Cap Switch
Hey All, Trying to work this MPS Gas Cap into my R2 project. I want to use it as a fail safe switch in case R2 makes a break for it. I want to use it in reverse of what it is advertised for. Basically I want R2's power to be on when the "plug" is in and shut off if the "plug" is pulled. I've tossed it together on my bread board...
16
4 k
Lumpy |
question
Cheap Distance Sensor - Free Shipping
https://www.dealextreme.com/p/hc-sr04-ultrasonic-sensor-distance-measuring-module-133696 DX is a good site but always takes a while to ship - I'd allow 3-4 weeks in Australia at that is...not sure about US times
1
3 k
Lumpy |
question
Which Wall-E?
Hi - thanks for the great demo at Maker Faire, DJ. Can you (or anyone else) tell me which Wall-E is shown in your video? It looks like the "U-Command Wall-E" from Thinkway Toys (2008),...
5
3 k
jstarne1 |
question
Chain Together Actions/Results To Create Behaviors?
Hi all. New here. Bought my kit at Maker Fair in CA, waiting for the goods (can't wait!) Quick question for you guys. Thinking about autonomous behavior, is it possible, using the GUI interface, to create linked event models? For for simple example, If this, then that types of events? (I promise I'll read through all the posts before asking simple...
2
2 k
jstarne1 |