modifying a rc car(truck i guess) to operate off a sabertooth and the ez-b. Any responces are welcome
Specs: Sabertooth 2x12 Ez-b V3 2, 2.8-3A dc motors w/6A peak standard servo for steering
Rc car torn apart:
the main body. the wheels were driven by one motor and gears. going to modify and put 2 motors directly(with gearboxes) on the wheels. then attach to the sabertooth and yadi yadi ya.
By CardboardHacker
— Last update
Other robots from Synthiam community
DJ's Irobot Roomba Hack
Convert an iRobot Roomba with EZ-B to a wireless, voice- and vision-enabled cleaner-camera color/motion tracking, remote...
DJ's Trs-80 Model 100 Controlled Wall-E
Control an EZ-Robot Wall-e from a hacked 1983 TRS-80 via TTL Bluetooth; load BASIC programs over Bluetooth; EZ-SDK...
Buratino's Buratino - Humanoid Animatronic
Buratino 50x50cm 3D-printed humanoid with 23 DOF, heavy-torque servos, EZB camera motion tracking, speech recognition...
after my wall-e failure I came up with a very cool idea. mount the top half of him on the rc car shell, and make it easy to remove so I could have just the rc car if I wanted to.
@technopro how did you modified the steering ?