Robot Building Questions

H Bridge Voltage

Can I feed the h bridge sold here with 12 volts dc? From what I have read it will only take 5 volts. Thanks, Dave

To Sfoy About Denise

I forgot to tell you that you can purchase the $100 version of Guile3D Denise and upgrade to the $180 later by just paying the balance. Pretty neat. If you decide to buy, don't forget to tell them that Mel (MovieMaker) sent you. They have been very good to me, and I want them to know that I appreciate it by spreading the word. Don't expect for...

Servo Motors Disengaged

@DJ Just a heads up. I just went through the servos in my kit and found three of the 4 standard servos did not function correctly. They whined when plugged in. After closer examination, I found that the servo motors had shifted down in the casing during shipping causing the motor gear to disengage from the gear stack. I pushed them back into place...

Can't Connect To Bluetooth

Fresh batteries, connects through bluetooth config (ports 4 and 5), however, when I launch ARC and select port 5 (or port 4, seems to not matter), no dice. I've uninstalled the device and reinstalled, I've power cycled, etc. No dice. Any ideas? stress

How To Get More Analog Ports From Ezb

here is a simple design to have more analog ports for EZB without using a second EZB pretty simple design and works perfect use a cd4051 or cd4052 multiplexer chip anone analog port and 3 or less digital ports can hook up as much as 8 analog devices,4052 does 4 analog devices circuit is super simple to make only chip and EZB SAME can be done with...

Ar Drone 2

Hello from Nova Scotia. I've been watching for an update to EZ that would handle the new AR Drone 2 as well as the video from the Drone. The new SDK for the Drone 2 has been released so I'm wondering if there are any plans to update to accommodate the Drone 2? Your software seems very well thought out and offers a million possibilities and I could...

Rock Paper Sicissors Robot Never Looses

www.wimp.com/winrate/

Going For A 1/16 Tank Base For Robot - Pro's And Cons ?

After messing around with Servos, Cogs and home made tracks for "Bob" the last 2 weeks I've decided to give in to the idea of a RC 1/16 Tank Base. I was impressed with Dogbots mobility and they seem to have a low centre of gravity and move pretty good outdoors."Bob" weighs about a 1 kilo so I'm guessing it should be able to move...