Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Overlay PNG/JPG images in real-time onto detected objects, faces, colors or glyphs using ARC Camera tracking; attach, preview, detach.
Featured
Attacknid six-legged robot using two motors, Dual H-bridge with EZB, lithium power, six ultrasonics and EZB camera tilt, low-cost hexapod.
question
Older Version Of The Robot
I am absolutely upset and wish I had never upgraded the software or the firmware for my ez-b board. I am trying to make the boxbot with my daughter for her science fair and all the images, controls and everything have changed. Ho do I revert this back to the older versions? This is horrible. I spent 400 dollars on this product 2 years ago and now...
14
5 k
napo |
question
Request For Multiple Rows, Vr Commands Under Speech Recognition Choices?
I have a request for more than standard VR one row commands under speech...
10
4 k
Steve G |
question
Hb25 Motor Controllers
Hello there, Hey, this may have been asked before, but has anyone had any luck controlling two Parallax HB25 controllers ? I am trying to experiment getting the two wheels to move correctly via the continues servo control panel, and seem to be having issue with the start/stop values,etc.. I'm sure there is something i'm missing. For now I just want...
3
3 k
RoboHappy |
question
Three Wire Ping Sensor
I have a three wire Ping sensor. Can I use it with my EZBv4? I have used the normal 4 wire sensor from EZ robot but would like to use the other sensor I have available. Thanks to All Ron
3
2 k
Dunning-Kruger |
question
Smart Arrange And Cheat Sheet Help Needed
I have a couple of problems I'm hoping can be solved. 1.) Smart Arrange. I'm having issues with "Smart Arrange". I have it disengaged/unticked and the project is saved in this state in both the Cloud and on my C: drive as I want to place where the controls are myself. When I add a new control, it rearranges everything I have done (except...
8
3 k
Steve G |
question
Robot Hindi Movie
Found this on youtube: Robot Hindi movie I thought it was pretty good, and hey, it's about robots:)
0
2 k
tonycarl60 |
question
I Need Help
5/22/2015 9:03 AM - Error with speech recognition init: ?????? ?? ?????? ?? ????????? ?? ????????? ???????. How to fix bugs. mic I have
9
3 k
Steve G |
question
Tight Servo
Hi, I was at a conference all day today with JD. I had him running the 'pushups action.' He worked perfectly well for several hours. Then I noticed that the right shoulder servo wasn't moving...
15
6 k
Dunning-Kruger |
question
Script Writing 101
Hello to All, I have begun to use the Auto position panel in my projects. I want to write a script to run the different action blocks. I also want to have events like a signal from the ultrasonic sensor or a digital signal from a sensor to operate an action panel. My first step would be to put the robot in a start position then have the actions,...
4
3 k
Andy Roid |
question
Possible New Option For Embedded Computing
Just saw this on Engadget's CES coverage. Not clear if it will work without being plugged into an HDMI port since it is designed as an...
16
5 k
Dave Schulpius |
question
Inmoov Is Alive Da Da Da
Ok so I watch the cams every once in awhile to see projects in the works and I just noticed that the inmoov's head has changed in direction and it was looking straight...
0
2 k
Linux robot 9… |
question
Minimising Controls
So in the ribbon menu of ARC, under the controls tab there is the "Minimise All" tab which comes in very handy, freeing up screen real estate. Is there a way to do this on individual controls instead of minimising all of them? The problem I have is when I minimise all, and restore what controls I need to be on show permanently, when I...
4
3 k
Steve G |