Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
TCP server for ARC accepting EZ-Script, JavaScript or Python commands, letting controllers send commands and receive line-terminated responses
Featured
Control Adafruit 16-channel PWM/Servo Shield with Synthiam ARC to drive multiple servos seamlessly.
question
What Is The Best Small Laptop To Use On I-Robot Create 2 Base Tjjhat Will Run Ez
Hello, I'm strongly considering a good small and fast Laptop or notebook/netbook that will run ARC Software/Hardware now and in the future. Needs to work with all aspects of ARC PC and Mobile now and in the future. I want to use a Foscam F19831P IP Cam with the EZ-BV4 Controller on the I-Robot Create2 base with the small Laptop....
1
3 k
DJ Sures |
question
Ez-B V3 Connection
I just pulled out my old V3 all lights flashing the bluetooth pairs perfectly but the problem is with the new version seems to only support v4 internet connection is there anyway with...
13
3 k
Dave Schulpius |
question
Old Timer Coming Back
Greetings to all, My name is Lloyd Cooper. I was one of the first purchasers of DJ's very first EZ-B (V1) and I have been away from robotics for quite sometime. I have returned to the fold and am looking forward to learning about the new EZ-B V4. As is the case with modern technology, many advancements have been made, and DJ and EZ-Robot are no...
6
3 k
Robotz012248 |
question
Remember When?
Taken from one of the earliest threads when EZ Robot was a baby. Dated - 2/26/2011 4:01:18 AM Thread #9
14
5 k
DJ Sures |
question
Appearance Of The Program
I just installed ez-build on my surface pro 4 running windows 10. I found that they layout of the program is definitely unreadable. I changed resolution, but no changed...
14
3 k
DJ Sures |
question
3D Scaling
Looking for some helping scaling this file down to fit the front plate of a omnibot 5402. I have no experience in 3d files and figured i would ask here. Also thought it might intrest anyone looking to...
11
5 k
Xuven |
question
New Grippers Who Can Really Grip Something
i found these grippers,where you can actully grip something whithout, burning the servo when stalling.they work on 5 volt up to 12 volt....
18
6 k
RoboHappy |
question
Servo Recorder Plugin - Can't Add To Project
Full Disclosure: I've never tried to install or use a plugin yet. This is my first. I may be doing something wrong. I'm trying to...
6
3 k
Dave Schulpius |
question
Roli Camera Projection
I have the Roli Robot, and I am trying to figure out what are the other ways of displaying a live stream of the camera rather than using System.Windows.Forms.Panel. I was trying to attach the panel to a material in Unity, however, Unity does not like working with Windows.Forms.
2
2 k
faraonc |
question
Unity And Ez-Robot Roli
Greetings! I am an undergraduate student doing a research on HRI using HoloLens. I currently have the Roli, and I am just wondering how I can connect to its webcam using Unity. In general, we are trying to control the robot using Unity, therefore, we plan to bypass ARC. Is there any particular way to do it?
4
3 k
faraonc |
question
Camera
I recently put my ezb in client mode. I gave the router it's MAC address so it assigns the same ip every time. However after doing this I never tried the camera. Today in doing so I find the camera not working. Do I need to give it an address also? Thanks Chris
4
2 k
kamaroman68 |
question
Jd Hips Dont Save
am using jd hips ez bulder,anything i make and save is gone next time i open , ez builder .
4
3 k
Nomad 6R |