Wheel Encoder Counter icon Wheel Encoder Counter — Arduino UNO wheel encoder: reads left/right ticks, provides counts, configurable ticks, wheel & pivot sizes, optional pose telemetry to ARC NMS. Try it →
Robot Showcase

Robot Steve My First Synthiam Robot

3,262 views 8 comments 1 photo

About this robot

Hey Everyone,

Here is my first robot I made since I got my kit couple days back. I am surprised at how easy it was to get going. I am able to control the robot with an N64 controller which is awesome!

Here are the features:

Head Wireless Camera with movement left right down up 2 LED Eye lights Arm movement Down Up Gripper Open Close Ping Sonar Bluetooth Speaker

I 3D printed the gripper arm designed by user jjshortcut on Thingiverse https://www.thingiverse.com/thing:2414

Then I just cut out the body from mattboard and used hot glue to put it all together. Hot glue is nice and strong!

User-inserted image

By — Last update

Discover more robots

Robots the community built with Synthiam ARC. Get ideas for your next build.


ARC Pro

Upgrade to ARC Pro

With Synthiam ARC Pro, you're not just programming a robot; you're shaping the future of automation, one innovative idea at a time.

#1  

Most excellent! Hot glue is amazing stuff. One more arm on the other side even if its not motored would be a nice balance....even if its matt board. :)

#2  

your right i should think of something. I think I will print a little arm with a holder so it can carry stuff.

Author Avatar
United Kingdom
#3  

Printing arms the shape of things to come (excuse the pun)

#4  

N64 controller? How are you doing this ?

#5  

Check out that little blue box on the table next to the robot. It is a N64 to usb adapter I had purchased a long time ago that came useful right now!

#6  

That's cool. I like the ps3 remotes the best I believe.

#7  

HOT melt is ok for easy to make robots,but i use mostly aluminum for a better bond and more professional look and design. Also easy to remove the part without all that glue you need to scrape off.