Hey Everyone,
Here is my first robot I made since I got my kit couple days back. I am surprised at how easy it was to get going. I am able to control the robot with an N64 controller which is awesome!
Here are the features:
Head Wireless Camera with movement left right down up 2 LED Eye lights Arm movement Down Up Gripper Open Close Ping Sonar Bluetooth Speaker
I 3D printed the gripper arm designed by user jjshortcut on Thingiverse https://www.thingiverse.com/thing:2414
Then I just cut out the body from mattboard and used hot glue to put it all together. Hot glue is nice and strong!
By feroze
— Last update
Discover more robots
Jdebay's Gripperv4 Old Parts And New Parts
Build Gripper V4 from old and new parts; updated design now includes an added camera.
Hoolagen1's Update To My Wall-E
SparkFun MP3 Trigger installation photos and new body tilt plus forward/back and left/right motion controls
Williamk's Inmoov
3D-printed InMoov robot with functioning motorized parts, first prints and movement tests, minor fit tweaks, photos and...
Most excellent! Hot glue is amazing stuff. One more arm on the other side even if its not motored would be a nice balance....even if its matt board.
your right i should think of something. I think I will print a little arm with a holder so it can carry stuff.
Printing arms the shape of things to come (excuse the pun)
N64 controller? How are you doing this ?
Check out that little blue box on the table next to the robot. It is a N64 to usb adapter I had purchased a long time ago that came useful right now!
That's cool. I like the ps3 remotes the best I believe.
HOT melt is ok for easy to make robots,but i use mostly aluminum for a better bond and more professional look and design. Also easy to remove the part without all that glue you need to scrape off.
Lookin good!