I designed IQ as a proof of concept robot.It is made of foam core 5mm thick board with .020 styrene plastic sheet overlays. He is 4.5 feet tall and can telescope its head another 8 inches using a camera tripod with motor drive. There is a windows 8.1 tablet installed on its chest. Power comes from a lithium battery pack for drive wheels and a 12 vdc sla battery for the electronics. The EZB 4 is connected in client mode. It is designed not to tip over with anti tipping brackets beneath the lower frame..The movement speed is moderate for stability. The arms are from a Robosapien that i received that did not work.I gutted the arms and installed 3 servos for each arm .It can rotate its arms ,elbows and open and close hands.
By rb550f
— Last update
Discover more robots
Cliffordkoperski's HAL THE ROBOT THAT WALKS AND TALKS
5.5ft humanoid walks, talks-56 servos on 3 EZB v4 boards via WiFi, two batteries, onboard PC; Synthiam ARC scripting...
Rentaprinta's Moveo Project
BCN3D Moveo robotic arm project: replicate original controls now, plan EZ-B control; BCN3D, GitHub and Thingiverse...
Fisha's Wall-E Wall-E From Poland - Tribute To My Newborn...
DIY Wall-E robot with 12-14 servos, camera, ultrasonic sensor, MP3 trigger, amplifier, laser diode, VU meter mouth and...
@rb550f.
You say it took you three months to cut and glue the panels for IQ... well, It shows. You have done a really great job with a clean build and ended up with a fantastic looking robot. I also really like the lighting you have going on there, especially the blue lighting strips. It really adds the extra "coolness" to the overall design. If IQ is a proof of concept, I really look forward to what you do next.
100 "Cool" points for you sir.
I second that!
IQ is very cool nice job! @tevans I got a pair just like that from Herbach & Rademan (link below) but I don't see them there now. But they have some similar ones.
www.herbach.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=HAR&Category_Code=DCGEARHEAD&Offset=10&Previous_Stack_Depth=1
@rb550f,
Any specs you can provide on the Windows 8 tablet? I'm looking at either a fanless pc with a small hdmi monitor, or a tablet as an onboard computer. Would be interested in knowing what you use and if its robust enough for your purposes.
Thanks,
John
I use a PIPO W4 8 inch tablet with Full Windows 8.1.It has Hdmi output and runs EZB software very well.Quad core...Excellent graphics..Purchased on EBAY for less than $100.