I am planning a fun weekend but we are not sure we will have a 110v power source nearby. Just in case I decided it may be a good idea to use a APC battery backup and parallel more batteries together for a longer run time. Also in the same unit I could have a 12 volt charger to charge batteries. Once I come back I will just have a really buffed up battery backup ready to use. I am going to use two small computer cases , industrial drawer handles , rolling casters ect. These are the donors. The idea is to power a few laptops / net books all day which are wattage anyways.
More robots by jstarne1
Other projects from the same builder.
Jstarne1's Sky Anchor ,Gig Wifi Drone
Hex coaxial drone with 12 props and 15 lb thrust, 3D-printed frame to lift a WiFi antenna and camera for extended robot...
Jstarne1's Air Tunnel Plus Bot The Smartest Way To Kills...
UV air sterilizer and mobile disinfecting robot with RGB, pest trap, scent control, timed ozone/ionize, motorized UVC...
Discover more robots
Robots the community built with Synthiam ARC. Get ideas for your next build.
Cjmekeel's 3 Axis Skull Halloween Prop
Build and demo a first robot with EZB and Synthiam ARC, showing basic functionality and planned camera-based...
Chiefavc's My Recent Projects After Getting My 3 Dev Kits
Robot photos showing multiple angles for build documentation, inspection, and troubleshooting.
Steve's Affirmative. K-9 2.0, Online And Fully Operational....
K-9 2.0 home robot using Synthiam ARC and EZ-B v4 for servos, speech and face recognition, DIY MDF/RC chassis and...


OK just doing a bit of test fitting here... This is the 12 volt 9ah SLA. The standard battery backup uses a 12v 7ah but the same size and shape. It appears I can get 4 or 5 of these batteries lined up on the bottom. Perhaps I could do a second row above them too which is 10 batteries for 90ah of power. That's 1080 watt hours. I may only do one row. I don't want this to be so heavy I can't pick it up without throwing my back out lol. Each battery is 6 pounds.
I have the guts to a 600 watt APC backup and a 12v source to 12v battery charger. Now I need some Velcro straps to hold batteries down and wheels to put on the bottom and two heavy duty handles for the top.
When I get back this could be an excellent backup supply for the smart fish tank system. Twice the power has gone out since January so a backup is nice.
OK tonight I'm going by LOWES to get a couple heavy duty steel handles and 4 low profile caster wheels. I don't want to carry this guy everywhere. I already have the 600 watt inverter guts but I may upgrade to a 1200 watt inverter since I can get a discount at shields electronics. That would be 1200 watt continuous rating too. Tripp lite brand. If anyone has suggestions for this mobile power source I'm using for the maker faire let me know
Looking at handles like this...
OK I have more batteries , it appears I can easily fit 4 batteries across the bottom and keep from front USB connections ( which I'm considering for charging my phone and other 5v USB stuff) but I could fit 5 across otherwise.

Here is the guts if the 600 watt APC. Simple right? I will just need to hookup outlets in the back of the case.
I will mount this as high and out of the way as possible...
The transformer looks like it would fit well in the 3.5 inch HD caddy.
OK I'm epoxying the wheels tot he bottom of the case. Once its dry I will predrill the holes and feed machine screws from the inside out and secure with a nut.
I went with these heavy duty door pulls rated at 150 pounds , they are rolled steel and light for their size. I like the ergonomic feel that they have with no sharp edges.