Welcome to my MRB1 (My Robot Buddy V1)
I have removed the post because it was corrupted somehow and all the pictures and formatting was lost.
This post needs to be deleted.
Welcome to my MRB1 (My Robot Buddy V1)
I have removed the post because it was corrupted somehow and all the pictures and formatting was lost.
This post needs to be deleted.
hi smiller29
very nice project . wel explanned topic and great pictures . thanks for sharing .
Hi there,
I also have the Creality - Cr 10S pro v2 printer
my settings I use is:
"glass" bed = 87 nozzle = 237 speed = 20 to 60 max fan off Z = -2.29
I also use PETG filament - using the Ultimaker Cura 4.8 for settings, slicing etc...
good luck with your project - looks great so far
EzAng
What fun! It looks great! Please keep sharing. I'd love to see how those eyelids look in a vid when moving when you get it programed.
EzAng, I have made many upgrades to my CR10s pro V2, I use the Wham Bam printer bed, Micro Swiss 4.0mm Hot End, Bontech direct extruder. I use PrusaSlicer nozzle 235c Bed 85c The following are the key settings I use. I hope these may help others.
Dave, I will make sure to add videos once I get deeper into the project. Here is a link to the eye mechanism I used as a baseline for my remix.
https://www.instructables.com/DIY-Compact-3D-Printed-Animatronic-Eye-Mechanism/ Will Cogley has done a great job outlining his project and I would recommend you check it out.
Wow, wonderful design in that video. Looks lifelike.
I wish I were that organized! Right down to the connectors - wow
. This is going to be a fun build to watch.
DJ, Trust me if you saw my work bench you would see I am not that organized... But I hope to improve once I can get some of these parts put together. I just need to get a few more thing to start more of the assembly.