Discover more robots
J's My Hexapod Project
Modular aluminum robot brackets and hardware for versatile robot builds, torchmate-cut parts, bearings, shoulder bolts,...
Dunning-Kruger's Irobot Create Project. Sneak Peak
iRobot Create butler/remote-presence robot in development, planning an all-out build with EZB4 and future updates
Waynea's Tall Tower Light Controller - Ezb V4
Monitor 19 broadcast tower strobe lights remotely with EZ-B v4-easy relay integration, fault signaling and simple alerts...
is this head in ARC still for use? but with ezbv4 then
@nomad... it's just a plastic mask with servos and leds so it will work fine with any version of the ezb
rr
yes i know that. i mean the mask is not chowing in ARC under robots.
@nomad18.08 You don't need a control for it... it's not a robot... it's just 3 servos, 2 leds and a plastic mask... It's not difficult to animate using simple scripts or the auto positioner control.....See here....
rr
thanks
Looks great! Very realistic looking. Well done!
Here is a photo of my robot and the mask I used.
There is an EZ camera installed which looks thru the hole in the nose. I used 2 standard EZ servos in the neck which allows movement. The eyes are made from white plastic eggs which are glued to the servo arms on 2 micro servos.
@ nomadTMBS
She does facial tracking and eye tracking which I know you have done. Just be sure if you use micro servos get a voltage reducer so you don't burn them out.
Ron
PS the mask was about $5.00 at a craft store.
thanks for the tip