Hitachi-LG LDS Lidar icon Hitachi-LG LDS Lidar — Hitachi-LG LDS 360-degree LiDAR driver streaming scans into ARC NMS for obstacle detection, SLAM use, Arduino hookup, config options and variables. Try it →
Robot Showcase

Mr. Metal Robot 2020

2,917 views 10 comments 1 video

About this robot

Talking Mr. Metal robot - ARC software  - 2 io tinys  2 RGB for eyes - servo city parts, gears, channels etc...

DFRobot hex base rotation

Wheels to come one day might use the servo city agent 390  https://www.servocity.com/agent390  if I can run it with an EZB4 with battery

EzAng

By — Last update

More robots by EzAng

Other projects from the same builder.

Discover more robots

Robots the community built with Synthiam ARC. Get ideas for your next build.


ARC Pro

Upgrade to ARC Pro

ARC Pro is your gateway to a community of like-minded robot enthusiasts and professionals, all united by a passion for advanced robot programming.

#1  

Looking good ! I like it. Well done :-) Love that Actobotic metal. The arms are cool. I just put the arms back on Hemi and wired them up.  Will you adding a drive system  or its  to be stationary?

Author Avatar
PRO
USA
#2  

I want a drive system

with the servo city Agent 390 can I use the 1300 mAh  7.4 V batteries ?

EzAng

#3   — Edited

That was fun. Lots of room for expansion of ideas with his personality and animations. Have fun!

ServoCity Rocks!

#4  

@EzAng Yes, should be able to. I have to look, I think I did a current measurement once on the actual draw of those motors under load (I use to have an analog current meter attached).

Author Avatar
PRO
USA
#5  

thanks Dave, servo City does rock.

Thank you also, RoboHappy, I will try the servo city Agent 390 and use the EZB4 controller with the 1300 mAh,  7.4 V batteries - I will use a h bridge motor driver for the motors.

I will see what happens, trial and error again  :-)

EzAng

Author Avatar
PRO
USA
#6   — Edited

Hi RoboHappy,

Not getting the Agent 390

I am getting the Prowler Robot Kit - wheels next week - I will be on the road, I hope :-)

using the EZB4 controller, with an h bridge motor controller with the 1300 mAh, 7.4 V batteries, servo City tech said that would be ok

https://www.servocity.com/prowler

The 15 percent off helps a lot  :-)

EzAng

#7  

The prowler kit is nice. Lots of room on it to do so much. I still might get the Nomad or Warden kits for other projects.