Talking Mr. Metal robot - ARC software - 2 io tinys 2 RGB for eyes - servo city parts, gears, channels etc...
DFRobot hex base rotation
Wheels to come one day might use the servo city agent 390 https://www.servocity.com/agent390 if I can run it with an EZB4 with battery
EzAng
By EzAng
— Last update
Other robots from Synthiam community
Deuel18's Oculus Rift Is Out, Any Ideas?
Hey guys. Oculus Rift is out, wondering if we can hack it and use it as another controller for our EZ-Robots. Im also...
DJ's And Now For Something Completely Different (Pdp-8)
This isn’t robot related... although I used ARC to make the software vc8e emulator. Read on... I’ve always been a HUGE...
Toymaker's My Little Dewey (Drone 1) New Home
What does an Inventor/Roboticist have in his design studio? - Well for me its my (Alexa controlled) favourite Movie...
Looking good ! I like it. Well done :-) Love that Actobotic metal. The arms are cool. I just put the arms back on Hemi and wired them up. Will you adding a drive system or its to be stationary?
I want a drive system
with the servo city Agent 390 can I use the 1300 mAh 7.4 V batteries ?
EzAng
That was fun. Lots of room for expansion of ideas with his personality and animations. Have fun!
ServoCity Rocks!
@EzAng Yes, should be able to. I have to look, I think I did a current measurement once on the actual draw of those motors under load (I use to have an analog current meter attached).
thanks Dave, servo City does rock.
Thank you also, RoboHappy, I will try the servo city Agent 390 and use the EZB4 controller with the 1300 mAh, 7.4 V batteries - I will use a h bridge motor driver for the motors.
I will see what happens, trial and error again :-)
EzAng
Hi RoboHappy,
Not getting the Agent 390
I am getting the Prowler Robot Kit - wheels next week - I will be on the road, I hope :-)
using the EZB4 controller, with an h bridge motor controller with the 1300 mAh, 7.4 V batteries, servo City tech said that would be ok
https://www.servocity.com/prowler
The 15 percent off helps a lot :-)
EzAng
The prowler kit is nice. Lots of room on it to do so much. I still might get the Nomad or Warden kits for other projects.
All the Robot Kits can be re- worked https://www.servocity.com/kits/robot-kits
I have been getting some information on the Actobotics Attachment Ideas https://www.servocity.com/actobotics-attachment-ideas/
I might be able to use numbers 38 and 164
EzAng