Hi all! I'm excited to share this project with you, this is the robot RSP, I bought my second ez-b (v3) and having checked with my first robot(MY ROBOT)
, I decided to undertake a larger project, its height will be of 5.4 feet (1.65 m), currently under construction I have the head, and gathered the materials for the traction system, some voltage regulators, 2 rc esc, several batteries, etc..
I enclose a drawing of how it will look when completed and some photos and video. I hope this project will have a mutual sense of teaching and learning for the entire community that will inspire others and that I may be inspired by all your valuable ideas, more information soon.
By R2D2
— Last update
Discover more robots
Jdebay's Garden-Bot Aka Gb Robot
Garden-bot parts, updates and build notes: 6WD Thumper chassis, EZ-B v4, motor H-bridges, battery options, camera,...
Ezang's Roman The Robot
Roman the Robot using Synthiam ARC with EZ-B v4, Arduino and servos for articulated arms, grippers, camera pan,...
Goldenbot's Stickman JD Robot V1.1
Control JD Humanoid in Synthiam ARC with Stickman JD: 3D joint dragging, rotate view & floor grid, works with EZ-B...
@ RichMR2: the hand strength to grasp objects is small, you can grab box of cigarettes or objects of similar size and weight. Although the servos have strength, fingers are of a plastic-like material rubber and these are twisted slightly, is rather to gesture that manipulation, greetings.
Now that's cool. Thanks R2D2 for the vid. Amazing stuff and very helpful. I'll be needing some of these ideas when I build the arms and claws on my B9. However it will be much less elaborate then your creation. All I'll need to do is open and close the claws and maybe even rotate them around. It's good to see how someone like you has done this.
Thanks again! Dave
I had forgot how awesome this robot was!!