This summer I am hacking my old RL 500 Robomower and turning it into an autonomous robot using the EZ-B. I started the major hack today with the installation of a motor controller for the robot. The motor controller has two PWM inputs for speed of the motors and direction control for both. It does not match exactly the motor control board in the demo on the site, so I will need some community input. Also, I have mounted a Kinect and the EZ-B camera on the robot. Ideally, the ARC s/w could support the Kinect... (come on D.J. Sures!). I have the book making things see and I might run processing and an Arduino in addition to the EZ-Robot to do the Kinect functions, but the data interface would probably be through the EZ-B and the Arduino via I^2 C. Maybe the arduino/processing combo can tell the EZ Robot system some basic info about the surroundings to help in navigation. I am all open to suggestions and input on how to do this. I'd like to add arms too, but they will have to be light because I am using a tri-pod for the body. BTW - I am not using the mower to mow anymore, blades are removed, etc.
More robots by MarkTheBotBldr
Other projects from the same builder.
Markthebotbldr's BB-R2 (Baby R2)
Build Baby R2 (BBR2) with supportfree 3D prints; create Synthiam ARC robot app and iPad mobile control for easy...
Markthebotbldr's R2D2 Interactive Hacked!
Hack R2-D2 interactive with EZ-B v4, dual L298N motor controllers and a Synthiam ARC mobile app; add sensors for...
Markthebotbldr's What Should I Name This Robot?
Tiny Roomba robot Red Poppy with Controller IO, temperature and light sensors to amuse your cat.
Discover more robots
Robots the community built with Synthiam ARC. Get ideas for your next build.
51M0n76's Meet Arnie
Homebuilt robot Arnie with pan/tilt head that looks around freely; awaiting H-bridge for mobility, plus paint and arms.
Ezang's Happy Crawler 5/18/2021 And New Combination Robot...
Metal-legged robot built with Servo City parts and 4 servos, IoTiny battery, using Synthiam ARC programming to achieve...
Jstarne1's 2013 Robo Ducki , Gift To Dj & The Ez Robot...
Custom EZ Robot Ducki scaled for microservos, 3Dprinted robo-duck celebrating EZBuilder, EZBits and EZB v3/v4 with...




Jstarne1, I got the sabertooth V2 and installed it on the robot tonight. Great advice. I don't yet really understand the values I used in the setup (found in another post), but it seems to work fine.
Here is the robot with the Sabertooth installed....
Here are my settings....
Finally decided to name the robot Max.
https://www.facebook.com/video/video.php?v=4622268806799
It says the video cannot be played , are you sure its public without restrictions?
I'm glad the Sabertooth H bridge suggestion worked out for you. Dimension Engineering is well known for a quality product in a battle bot community and it looks like that translates to reliability in personal robotics too. I'm about to install a 2 x 12 model that just replaced their previous 2 x10 that they discontinued.
hi out there - did you ever get a working solutions from this? I have also a cuple of Robomower RL's which I am looking for a template for con verting to some home-brewed solution...
Thiw, I have not messed with this robot in a long time. Now that we have the interface with the Kinect, I might look at it again. The robot is so powerful due to the gear ratio that you have to be careful to make sure you have a good e-stop!