All Community Content
Don't limit your robot's potential – subscribe to ARC Pro and transform it into a dynamic, intelligent machine.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
Inverse kinematics for Robotis OpenManipulatorX: compute joint angles and MoveTo 3D (cm) positions, supports camera-to-CM mapping for pick-and-place.
Featured
Create an ARC project to migrate your Raspberry Pi-based robot to Synthiam ARC, configuring hardware, scripts, and apps for full control
robot
Toymaker's My Alexa (Alive)
Give Alexa a pretty face: see what it's like to add a visual, human-like face to Alexa.
10
4 k
RoboHappy |
question
Hitec D845WP Servos Can't Move Slow And Smooth
I'm testing a new robot , using ezbv4 and hitec D845WP servos with lipo 7,4 V batteries. (I never used these servos and such high-current batteries before). These servos are very quick, expecially with lipo batteries. So, when I program an action, I can't get a smooth and and slow movement, no matter how I set delay, step and speed in the action...
9
4 k
Dave Schulpius |
question
Strange Issue With Servo Speed/Delay/Steps And Usb Camera
Hi everyone, I have been following you for some time and first of all I wanted to thank this forum and the...
14
3 k
DJ Sures |
release
ARC Raspberry Pi 2019.04.11.00
Auto position movement panel lets you set variable speed modifiers per frame in an action; double-click a frame to edit and enable speed values.
0
3 k
release
Beta Release 2019.04.11.00
Auto position movement panel enables variable speed modifiers for all frames in an action - double-click a frame to edit and enable speed values
0
3 k
question
Getvoltage - Object Reference Not Set
Can anyone tell me why GetVoltage() in a script gives me the error "Object reference not set to an instance of an object" ? Regards BAW
2
2 k
baw |
release
ARC Raspberry Pi 2019.04.09.00
Beta fixes: board ID required for GetBatteryVoltage/GetCPUTemperature, IMU gyro in deg/s, movement speed events and auto-position speed fixed.
0
3 k
release
Beta Release 2019.04.09.00
GetBatteryVoltage/GetCPUTemperature now require board ID (GetVoltage(0)); IMU gyro in /s; movement speed events and auto-position speed fixed
0
3 k
live hack
Hacking Robotis Opencm 9.04 With Bioloid
Program OpenCM 9.04 with EZ-Builder to control Dynamixel Bioloid servos via USB using the Arduino OpenCM library and EZ-Builder's Dynamixel...
6
5 k
Mickey666Maus |
question
Inmoov Kinect Function
Hi, I'm diving into InMoov and have thus far just been printing parts with abandon while I finish researching everything else. I have totally decided to go with EZ-Robot rather than MRL for obvious reasons, but I have found conflicting information about whether I can use the Kinect with EZR. Beyond whether I can use it or not, I'm a little...
2
3 k
Perry_S |
question
Rc Lawnmower
These Rc lawnmowers caught my attention, So i purchased a spectrum DXE remote controler with reciever, also purchased a 2x32 sabertooth drive. I have a key start mower, just don’t know what othe components i need to start my mower from the controller any help please?
8
2 k
DJ Sures |
question
2 Single Motor Controllers
Just wondering if any one has run 2 single motor controllers instead of a dual channel H-bridge on their tank style robot and will it be hard to get both controllers to...
10
3 k
robo rad |