All Community Content

Servo Positions On Power Up

I have a problem with the head servos moving into a damaging position when powering up. I have looked at various comments on the problem but haven't found a solution. My vertical head servo appears to move into about -10 on powering up. My INIT script moves it back to 1 but -10 or so is going to break the robot's mouth. An EZ servo can physically...

HDD Servo Supplier In UK

Hi People, I bought a JD Humanoid around 2017, worked great and had some fun. I had to shelve it for quite a while due to health issues. I took it off the shelf a couple of months back and after operating it for about 10 minutes his left arm took on a mind of its own. There seems to be an issue with the shoulder servo or the upper arm servo, it...

Add Second Camera Video Into Synthiam Window

I have a ez-robot camera that I am using for all the pluggins it is capable of.  What I want to do is take a third party wifi camera and add that cameras video and sound to the ARC  program. Is this possible? To keep it simple, if sound is a problem I can use the ezb camera for sound.  Both camera's will be on at the same time.  If not possible, I...

ARC Update Corrupted My ARC Software

Install the arc update, immediate problem with loading previous saved projects, particularly with joystick installed. How do I roll the builder software back to previous version without losing all my projects files? ARC is a bad update if you can,t use the files I was just using yesterday.

I2c Mcp23017 HELP!

Any info on using MCP23017 i2c chip? I try to run a simple loop counter with prestart setup (i2c chip  i2cwrite(0,0x40,0x3) i2cwrite(0,0x4E,0x3) ),output ( i2cwrite(0,0x40,$motor1)      i2cwrite(0,0x4E,$motor2) ) with a loop and variable scrip and it just disconnects!