All Community Content
ARC Pro is more than a tool; it's a creative playground for robot enthusiasts, where you can turn your wildest ideas into reality.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
4-series historical line chart to log and compare robot sensor values over time with customizable titles, colors, time axis and EZ-Script control
Featured
Introducing a new robot with a short demo video showcasing progress and community support.
question
Error Speech Recogition Init (Italy)
Good morning, when I ask JD to say "ciao", ARC gives me the error in the image. what can I do? Thanks
1
2 k
DJ Sures |
release
ARC Beta 2020.06.14.00
Rename 2-wire H-bridge to Dual H-bridge and apply JavaScript fix so Auto Position Stop appears in Script Edit right-click.
0
3 k
question
Extension From Ezrobot Camera Lens To The Module
Looking for an extension from the camera lens to the module board. I was hoping for maybe a foot to 2 foot long maybe a...
5
2 k
Redzone |
robot
Perry's Thoughts On 3D Printing
Upgrade 3D printer firmware to Marlin for thermal-runaway protection, improved motion and safer prints-keep firmware current like Synthiam ARC.
10
2 k
nallycat |
question
Easydriver And NEMA17 Stepper Motor
Hi, I am trying to use a NEMA17 stepper motor (from an old 3D printer) with the EZB v4, through the EasyDriver - Stepper Motor Driver from Sparkfun. I...
10
4 k
fredebec |
question
Servos Twitch When Powered
hi all am new to this,and am building a inmoov ,the problem is when I first put power to the ez-bv4 my servo outputs are powered up,which causes problems.when I have connected to my pc all is well and I can run my program ok,i am most proberly missing something but I don't know what? thanks walter
12
2 k
DJ Sures |
question
Wii Controller Not Working Consistently On Windows 10
Hello, I'm having a lot of difficulty getting the Wii controller to work consistently on Windows 10. I've...
3
3 k
DJ Sures |
question
Robot Building Safety?
This is just a quick little PSA (public service announcement) I hope this will be ok to post here? Always practice safety when building your robot, be it the shop tools you...
2
2 k
RoboHappy |
robot
Knusel's Johnny 5 Hannover
Johnny 5 from Short Circuit-inspired robot project showing steady progress with build photos of ongoing development
4
3 k
DJ Sures |
question
Robot Jerking Servos
I added a pan/tilt system to my robot to track objects but the servos just jerk around randomly. Help? I'm using some Tower Pro servos I had lying around.
3
2 k
DJ Sures |
question
Camera Movement Control
Hi All! My son and I built this robot with a mix of parts, hot glue and some fun. It has two motors connected to the ioTiny through an hbridge. The ez robot camera moves...
8
2 k
ggr_scott |
robot
Rb550f's Ez Robot Attacknid 6Lr
Attacknid robot with EZB V3: 18-inch walker with 12V lithium, dual H-bridge drive, sound/LED mic, 12-inch LED fan, under $100
10
8 k
David mcsdaver |