Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
PC Remote UI Client for ARC enables remote robot control via customizable multi-page interfaces from other ARC instances.
Featured
Roman the Robot using Synthiam ARC with EZ-B v4, Arduino and servos for articulated arms, grippers, camera pan, animatronic eyes and mouth.
question
Hi I'm Phoebe
Hi everyone, As you probably already know I'm Rich's daughter Phoebe that is building a Wall-e with my dad. I reckon wall-e is awesome because he's cute, funny and is the best robot ever! Here's...
10
6 k
Colin |
question
Ez-B Compatability
Hello Does anyone know if EZ-b is Compatable with RoboRealm vision software. I am reserching building an autonomous robot with some personality, facial recognition, ect... thanks Alain
1
2 k
Alan |
question
Mecanno Spykee
Hi, has anyone looked at modding the spykee robot , got one of these , the biggest let down was the camera being static , thinking of adding the ez unit to it to control the camera for a start. regards jamesd8
3
2 k
jstarne1 |
question
Setting Voltage Of Adc Ports
Hi guys, Is it possible to set the voltage of the ADC ports. I'm trying to get them to act as switches to control an LED array. I've already used up the 20 Digital I/O's. I want to set them to values 0 or 255 to switch between 0 & 5 volts' Any thoughts would be appreciated. Thanks Dan
10
4 k
danUK |
question
Ez-B Keeps Disconnecting
So I finally got around to testing out my EZ-B. I have all my stuff plugged in, and as soon as I power it on, several of the items connected to it start running - without...
20
4 k
jstarne1 |
question
Camera Control
I loaded the latest version of ARC and now the program runs slow. If I put the camera on pause everything is as usual however with the camera on, it takes between 2 and 4 seconds for the program to respond to any mouse click. I tried deleting the control and puting in a new one. No help.
12
4 k
DJ Sures |
question
Multiple Forms Ezb.Connect1 Problems
Hi Guys Im trying to create multiple forms with the EZ B connection on Form 1 (Home page). On Form 2 I have a button to activate digital port D19. I'm using the code below: ezB_Connect1.EZB.Digital.SetDigitalPort(EZ_B.Digital.DigitalPortEnum.D19, false); However I am getting the error: The name 'ezB_Connect1 does not exist in the current context....
5
2 k
orwnic82 |
question
How To Let A Robot Locate My Position
Hi there, what would be the best solution if you want your robot to recognice and follow you? Radio? A keyed bluetoothsignal? I want to build a robot that follows me in a certain distance. Maybe something similar to a wall-e, so I can put my shoppings into him^^ Im happy for any good suggestion and even more for a complete robokit
19
4 k
thetechguru |
question
Release 2012.02.08.00
Hello- I noticed today in the Downloads section that there is a new version of the ARC software (2012.02.08.00) I currently have the 2012.01.31.00 version installed. When I try to install the newer version, it says the version I have installed is newer than the new one and exits out. Also, when I click on the "Release Notes" next to the...
3
2 k
Djandco |
question
Size Of Ez-Robot Camera
Hi, Could someone please tell me what the size of the camera is after it has been taken out of its case including removal of the front lens surround? Thanks heaps. Rich &...
11
4 k
RichiesRC |
question
Any Good Books?
Hello, Want to start programming in Visual Basic, but there is a lot I don't understand. Anyone know any good books for a VB beginner? My goal is to write a Ez-b program to control a robot. - Mix3rn
2
3 k
cheekid |
question
Ez-Robot Kit, Ebay Buster Arrived, Still Waiting For Usb Dongle
greeting all just a little update. I got the ez and Buster Monday this week 2/6 but I have been sick and did not open them untill today. been going thru the on manual video's. I don't think I can do much more until I get the usb dongle. Check out my Buster, he work but is a current hog. I had Buster hooked to my bench supply and monitor the current...
2
2 k
jstarne1 |