Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
ESP32/Arduino EZB firmware with MPU6050 support: provides accelerometer angles and Yaw/Pitch/Roll gimbal servo values for stabilization and scripting
Featured
EZ-B enables quick creation of a Pringle Robot during launch time, showcasing fast, easy robot building.
question
Hi I Am New To Ez Robot , Jstarne1 Little Brother
His guys I just wanted to say hello. I am 16 in USA I have been learning from josh and it has sparked my interest and now I want to build my own robots. I am very new so I am just learning.
4
2 k
Troy |
question
Ez-B Do Not Recognize The Cordless Rumblepad 2 Joystick?
Dear Sir, I was unable to control a servo with a Cordless RumblePad 2 Joystick!? I select Add Control -> Misc -> Joystick Joystick windows button are: Config PC MicroSoft Refresh. There was no Logitech Cordless RumblePad 2 Joystick display in middle button? Would you please HELP How can I made EZ-B to recognize the Cordless RumblePad 2...
4
2 k
DJ Sures |
question
Ez Robot
This kit looks really cool. I've watched your videos too
3
2 k
Rural Geek |
question
2Nd Movement Control Panel Request Or Communication Only For Robosapien
Hello DJ, I was wondering if it would be possible to have 2 movement panels or...
12
4 k
thetechguru |
question
Question About Random Number
I can generate a random number between X and Y. That all works good. But, I need to repeatedly have a different random number each time that I run the subroutine. I find that when I run it, it gives me the same set of random numbers each time i run it. Like it draws out of the hat, but instead of being natural random, it is sort of fixed. hope I am...
7
4 k
MovieMaker |
question
What Robot Chassis Is This?
Hi all, I was watching a movie and saw this cool 4-wheeled robot chassis, but I've never seen it before. I was hoping to do this for my first robot, and I like the...
3
2 k
robot56 |
question
Driver Of Motors
it is possible to use a course regulator from radio-controlled models. I use motors from a storage drill (12?, 30?) the tank chassis
3
2 k
DJ Sures |
question
IF/Else EZ-Script Request
Please, The "Then" and "Else" for the "IF" statement. I know , they are not needed. But, if it isn't too many hours of hard work. Just a request.
3
2 k
DJ Sures |
question
Rss Feed Unstopable
It seems an Rss feed is unstopable until it reaches the end. A "ScriptStop" will try to stop it, but will only lock it up with "(highlighted in green) Stopping". I would like to stop the SpeakRSS whenever I wanted rather then wait until it normally ends, with a Script command or an EXEC. Any leads/suggestions would be...
2
2 k
irobot58 |
question
Chocolate Milk Robot , How I Mix My Nesquik To Make It Rich And Frothy
I love chocolate Milk but using sugar free imitation powder can leave you...
2
3 k
jstarne1 |
question
What's In The Last ARC Update? I Gotta Know! I'm Addicted!
I see there was an update a couple days ago on 11/24/12. Anyone know what's in it? There is no write up on it like usual. These updates are like crack. I gotta keep up with them! I gotta know what they do for my robot addiction! Thanks, Dave Schulpius
2
3 k
Dave Schulpius |
question
Speaktwitter Command Not Working
i can't get the twitter panel to work i had config it from the twitter setting but when i use the panel it reports: error:rss error fetching feed system.exception: error fetching http request the remote server returned an error(404)
1
3 k
DJ Sures |