Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Queries NMS Navigation2D scans for range at specific angles or arcs, returning latest distance data...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Read DHT11 temperature and humidity on Arduino (signal pin 4) using EZ-Genuino_DTH11_Uno firmware; exposes $Temp and $Humid variables.
Featured
Shogun humanoid's redesigned knees reduce bend and boost load capacity; EZ-B and camera repainted; ready for walking and gestures.
question
Help Me Build A Robotic Photographer Wiht Sony Party-Shot
HI I'm a newbie and appreciate any help I can get. I already did a search for photographer and sony party...
46
6 k
robotmaker |
question
Ezb Script Manger?
how do i move my current scripts,into the script manger without rewriting it all ? thanks guys cory
3
3 k
csa459 |
question
Where Is My Ez-Robot BBC Documentary
I'm watching this documentary this evening...
3
3 k
robohobo |
question
3.3V Vs 5V Strapping On Serial Connector
Another post reminded me of this question I've been meaning to ask. The underside of the EZB has traces near the bluetooth connector that seem to me like a user selectable voltage to the connector. My question is: Can I break the trace for the +5V jumper pad and solder the jumper pad for +3.3V? Also would this change the logic levels on that...
3
3 k
DJ Sures |
question
Rad 1.0 Voltage Question
Does anyone have any thoughts on whether the stock RAD 1.0 hardware and electronics will run on 12v? I want to test it all before I start modifying it.
5
3 k
robotmaker |
question
Are There Any Engineers With A Degree In This Forum
I need to ask a question about something I know RICH will post or others will post . I would like only please engineers answer this post. I can stop others posting on this post ,but only hope a engineer only will answer it. EDIT 3-19 Sorry guys forgot to ask what type of engineer i need help from I need a electronic engineer like me to ask a...
21
5 k
robotmaker |
question
Ez-B Tx/Rx Pulse Level
Is the Tx output 5V? Is the Rx input 3.3-5V compatible?
4
2 k
dicka |
question
Schematic Software
Hi, What programs do you guys use for creating electrical schematics of your creations? I would need something compatible with Windows 7 & 8. Thanks, Mike
10
3 k
Wolfie |
question
2.5 Amp Motor Controller
hi all, i saw the dj sures video on how to install 2.5 Amp Motor Controller to ez-b but i dont see a reason to solder the wires cant i just use jumper wires instead of soldering the cable to the motor controller thanks
2
2 k
Metealp97 |
question
Utilitiesand Settings Menus
mine appear to be minimized. when I click on arrow nothing happens. Trying to set up http server.
2
2 k
Tlloyd |
question
Dj!¡!¡!
Hi, Just wanted to ask, when are you building another robot?, if you do build another. Also, idea for ARC . Compatibility with Meccano Spykee mobile spy robot or similar ones. (Wowwee rovio mobile webcam) Just some thought up ideas. Feel free anyone else to post your ideas.
1
2 k
hhammoud |
question
Tip120/Tip122 Darlington Switching Circuit
hi all, what can i do with a TIP120/TIP122 Darlington switching circuit i think some people connect circuit to dc motors is it possible to run dc motors via TIP120/TIP122 Darlington switching circuit thanks
12
3 k
Metealp97 |