Robot Building Questions
Synthiam Credit
Your Credit: $0.00
Lower the cost of Synthiam products by contributing to the platform and community.
Recent Robot Skills
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with hardware-timed PWM,...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for real-time...
Hitachi-LG LDS Lidar
Hitachi-LG LDS 360-degree LiDAR driver streaming scans into ARC NMS for obstacle detection, SLAM use, Arduino...
Featured
Legacy iRobot Discovery and 4xxx control via EZB software-serial (D0), supports Arduino/EZ-Robot, adjustable baud rate; not for hardware UART/USB
Featured
Giant-scale tracked robot using EZ-Robot board and Wall-E software with Sabertooth 2x12R/C, ready for sensors and WiFi camera upgrades
question
Ezb 4 Wifi Connectivity
So my plans for my robot consist of 3 EZB 4 controllers. 1 will be mounted in the head, 1 at the lower drivetrain level, and 1 inside the all aluminum body. Eventually I will have a mini itx computer onboard this machine. My question is will the wifi signal penetrate the aluminum body? If not will there be a usb adapter instead of wifi that could...
7
3 k
kamaroman68 |
question
Ez-B Through A Router?
I bought a router for 25 bucks and got it working. Now I'm rethinking. Is it possible to connect the ez-b to a network/wireless router?
4
2 k
CardboardHacke… |
question
Ez-B V4 Conector Types
I saw in another post a picture of the new EZB V4 board sitting in DJ's hand. It occurred to me that there are few different connectors then was on the EZB V3. notably the main...
20
6 k
Troy |
question
Latest Update - It's Time To Show Some Appreciation!
I just finished reading the latest update and wanted to add my two cents. Personally, I understood when I placed my order that it was a "pre-order" for a new product. Being such, I anticipated that there could be delays or other unforeseen problems, so that didn't worry me. I believe that the EZ-Robot team have created an incredible line...
10
3 k
hoolagen1 |
question
Using Brookstone Rover - What Changes Required?
I saw the video about using the ez-robot software to control a brookstone rover. I am not clear on what physical changes are...
19
5 k
bobalston |
question
Ez-Robot Developers Kit For Sale Again !
I thought that the EZ-Robot Developers Kit (V3) had been sold on ebay but the buyer didn't want it after all so it's back here and is up for...
0
3 k
Robot Doc |
question
Servo Modification
how do you program two servos to move simultaneously ?
6
2 k
jstarne1 |
question
My Ez-B Order Is On The Chopping Block.
Well my dad is almost positive that he's going to cancel my EZ-B order. I'll update this thread with his decision. Also: your story about your...
25
4 k
Purple |
question
Usb Controller
@DJ Sures I want to know whether or not the USB controller control my robot through ARC or SDK? The controller link:...
7
2 k
Rich |
question
Hovis Eco And Ezb
Can the Hovis Eco be made to work with the EZB? I have been looking at this bot for a while and am really close to getting it but I want to be able to intregrate the ezb with it for...
43
7 k
Nomad 6R |
question
Ez-B Speaker Stats
What are the specs of the Ez-b speaker? Want to know if I can wire up another 35ohm 0.5Watt speaker to the same point or not.
17
5 k
CardboardHacke… |
question
Hello All. Bachelor Thesis Project.
Hey all, I'm very glad to be here in this great forum. I'm studying computer engineering and will make my thesis based on a robot project. I've started looking online for micro controllers like arduino etc, than found few videos on youtube about EZ, I feel so great. I would like some help if possible with my project. So what I was thinking is to...
4
2 k
irobot58 |