Kondo KRS ICS Servos icon Kondo KRS ICS Servos Control Kondo KRS ICS2/3.5 servos via EZ-B UART; experimental, untested. Supports chaining, virtual servo ports, Release() and Servo() commands. Try it →

Robot Building Questions

ARC Pro
Learn More
Upgrade to ARC Pro
ARC Pro is more than a tool; it's a creative playground for robot enthusiasts, where you can turn your wildest ideas into reality.
Synthiam Credit
Log In
Earn synthiam credit to lower synthiam product costs
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Loading...
Remote control robots or add telepresence capabilities with Exosphere
Waveshare Bus Servos by Waveshare
Featured
Waveshare Bus Servos

Control Waveshare servos (TTL/RS485): set position & speed, release torque, read position. RTS option for converters; reverse-engineered protocol.

Inmoov's Touch Sensors by bhouston
Featured
Robot By Bhouston

Build DIY touch sensors for robots in Synthiam ARC using foil tape on an ADC port and simple scripting.

Community

Welcome to the Synthiam Robotics Community

Sign in to unlock your personalized community feed — browse your posts, track replies, follow discussions, and join the conversation.

Log In to Access Your Content
question
I Need A Wireless Solution For Ezb V4 To Trigger 110V Outlets On And Off

I Need A Wireless Solution For Ezb V4 To Trigger 110V Outlets On And Off

Just like the title says I need a wireless solution to turn outlets on and...
question

Can ARC Program Robots With Raspberry Pi

hi, i was wondering if ARC could program robots with raspberry pi instead of the ez bv4
question
Using A Joy Stick To Take Pictures With Snap Shot

Using A Joy Stick To Take Pictures With Snap Shot

Hello everyone, I have a question about the snap shot control. I want to be able to take a picture with a joy stick button...
question
Does The Ezb Require A Connection To The Pc, Or Can It Operate Untethered? And A

Does The Ezb Require A Connection To The Pc, Or Can It Operate Untethered? And A

Hi there! New to the EZB, trying to figure out if I want to...
question
Battery Tech Is Improving

Battery Tech Is Improving

Take a look at the latest I found. There was another breakthrough last month as well but I didnt think to post it. The point being that battery technology is still...
question

Have The Models Began Shipping?

Hello, We are excited to order JD, have the models began shipping yet? Thanks,
question
Power Went Down In The Street

Power Went Down In The Street

1 hour ago the power went down in ower street suddenly.no i cant see the side bar, and only half off the button ubove.i try to correct it but no luck. if i make a...
question
Video Intro Splash Screen

Video Intro Splash Screen

Just something goofy I wanted to share. In preparation for new videos I made a green ratings splash screen like you see for movies. Feel free to grab it and use it in...
question

New To Robots / Ezrobot

Can someone explain to me or provide me script that will drive two servos at the same time. I have been able to get one servo to run using the add component of ARC . But I don't understand how to get two to rotate. Thanks in advance.
question

Ultrasonic Sensor And Sharp Ir Sensor

Looking for some help / sample of a script combining the 2 for navigation. This is on a omnibot 5402. I have the IR sensor mounted above his speaker. The ultra sonic is on a sweeping servo right above the IR sensor. I tried playing with Richs ping roam script and he just spins in circles. I would be grateful for any help with this.
question

Voice Recognition Was Not Able To Start

"Voice recognition was not able to start. There is either no listening device or your operating system is not supported" That's the message I get when I try to add speech recognition. I can record sounds using the microphone function and sound servo also works, so I assume there is a listening device? When I quit speech recognition, I get...
question

Reaction And Movement Of Robot

Hi Everyone, I would like to enquire if the EZ-Script is able to program the robot in such a way that.. 1. Detect red/green object 2. Move towards the object 3. Stop before the object (Around 3-5cm where it will be able to grab hold of the object) Is it possible? I would have to use the multi-color detection for detecting both colors (Red and...