Robot Building Questions
Harnessing the power of ARC Pro, your robot can be more than just a simple automated machine.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
Voice Activity Detec…
Real-time VAD using 300-3400 Hz FFT to trigger scripts on speech start/stop, with sensitivity tuning, live...
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Featured
Control UBTECH Alpha UBT-12HC smart servos via ARC using EZ-B v4/IoTiny UART, assign virtual ports, set baud, custom bits and position mapping.
Featured
Rebuilding Omnibot: fixing shoulders, wrists and claw, new head-servo mount, volt/ammeter panel, tidy wiring, battery replacement
question
Arduino Mega Is Being Powered Through The Uart Serial Tx/Rx Connection
So I want to control the Arduino power using this RFP30N06LE MOSFET and that...
17
10 k
Dave Schulpius |
question
Catching Up
Hey guys, I haven't been super active in the forums lately so I wanted to say hello to the fantastic EZ community. There have been a lot of good threads with tons of information. I've enjoyed reading them. Thanks to everyone for sharing. I haven't touched my robot for a few weeks. (I made so poor engineering decisions and got flustered. I think...
8
3 k
Robot Doc |
question
Tip120 & Tip122 Transistor Switching Circuit
I want to make some the switching circuits as per the attached picture to control some small motors and due to my limited...
9
12 k
steve.neal |
question
Whoops
Ordered Left foot & ankle for JD & received the Right foot & ankle! Whoops!
2
2 k
michaelc |
question
Help I Fried My Evbv4
stress I connected an h bridge to my ezb and was messing around with what ports to use when my ezb started to smoke and the lights turned off when I plug it in more smoke...
9
3 k
Dave Schulpius |
question
Would It Be Possible
would it be possible to included the end caps off servo's when ordering them. i think its good idea.
2
3 k
Nomad 6R |
question
Powering Stand Alone Robot
Hello and first of all, scuse me for my bad english. I am working from about 3 years (.....too many time!) on my robot. It is able now to do many things. It can...
8
3 k
jstarne1 |
question
Robot Losing Power, But Not The Battery
Hi all. My K-9 2.0 build is just about complete but I've come up against an unexpected issue. After running a couple of drive and script tests...
14
6 k
Steve G |
question
Help With Modified Servo
Hello. I have 2 motors controlled via a H-bridge so I have a movement panel all set up for this. But, I also have a single modified servo I need to control from time to time. Obviously I cannot use another movement panel as I already have one, so I have a modified servo control. It works but a cannot reduce the speed, even if I change the min and...
11
4 k
Steve G |
question
Getting Ezb Camera Feed Using Opencv And Python
Just an example showing how to get the EZB camera feed using Opencv and python. ARC has a greta setup but for those who would...
1
4 k
thetechguru |
question
Parrot Ar Drone 2.0 Programming
I am looking to connect with anyone who is programming the Parrot AR Drone 2.0. This drone has some amazing potential. EZ robot has an excellent intro video but I am very interested in developing stand alone programs and use additional sensors to make the drone human independent.
10
8 k
thetechguru |
question
Counter Script
Could any of you fine folks please post an example script of a counter. The "counted number" would be contained in a $string value? Thanks WayneA
2
2 k
WayneA |