Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
PWM Servo Ramping
Smoothly ramps PWM servos on EZB D0-D23 via Vx-to-Dx mapping for natural, gradual motion without...
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Featured
Persist and auto-load specified global variables between ARC sessions for consistent, personalized robot behavior and quick state restoration.
Featured
Positioning system for ez-robots after years of work and many trials, now heading to manufacturing for scheduled summer releases
question
Diffrent Voice Of Ezb4
Are there more voices available for the EZB4? Are there different voices downloadable.
3
3 k
Slee The Sloth |
question
Caliibration Lesson Galapagosbot?
how can i calibrate the servo's to 45 degrees for the galapagosbot?
17
4 k
Nomad 6R |
question
Mind Control Robots
Hi would it be possible to make a mind contromm robot or incorparate this technology. https://emotiv.com/
25
6 k
andrew34 |
question
Six Has Come Home
six alive and kicking. the poses are great walking very fast.really love it.
4
3 k
Nomad 6R |
question
Robotic Carbon Sequestration Tractor Help
I have no robotic controls experience. My field is renewable fuels. I am in the pre production development stage of a small cellulose fueled field tractor that has the capability of sequestering carbon while operating on renewable (cellulostic) fuel. It requires a relatively simple control system capable of following a raised row of soil and...
1
2 k
CochranRobotic… |
question
Camera Calibration Parameters
Does anybody know about the camera calibration parameters for the EZ robot camera. I am aiming at either the focal length in pixels or the diagonal, vertical or horizontal field of view FOV ? We know the number of diagonal and horizontal pixels. I need this for 3D reconstruction methods where the calibration params are part of the math model. These...
4
2 k
jop |
question
Ezrobot Tshirts
Hey, I just noticed one item missing from the store. Ezrobot Tshirts ! What better way to get the word out ! I know I'd love one
16
4 k
Nomad 6R |
question
Inmoov Servo Connectors
This looks handy. Not only for InMoovs but for other bot builders as well. Any InMoov builders using this? Multiple Servo Connector
19
6 k
Checksumff |
question
Ar Drone Colour Tracking
Hi, I tried the colour tracking in the ar drone v2. It works perfectly well. But the problem is, the drone comes racing towards the object as close at it can get. Can you tell me what I can do so that the drone stays a little bit far away from the coloured object always. Thanks & Regards Manoj
14
3 k
liupiaop |
question
Myo Help
Ok so I am trying to use my myo to control my R2... issue is I am having to run the forward .. back... left..right.. stop.. ect with the pose tab as you cant use the positioning to control movement panel (move are far right bot goes right... ect) this would not be an issue really, but in order to control with the pose commands you run into this...
4
3 k
DJ Sures |
question
Robotics In The News
I thought I'd make a thread for all things robo-worthy. For fun and inspiration! MIT's Cheetah jumps hurdles! Simian-bot Salamander-bot? Gecko grippers! It's only a flesh...
0
3 k
Troy |
question
Analog Capacitive Question
I am thinking about adding analog capacitive wires for my InMoov but have a questions. All of my V4's are in use on the inmoov right now so I dont have one to try this with or I would. In order for the analog signal to increase or decrease when a wire is touched, I assume that I have to provide current (+ and/or -) to the pad that I will be...
24
6 k
CochranRobotic… |