Robot Building Questions
Synthiam ARC Pro is a new tool that will help unleash your creativity with programming robots in just seconds!
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Control robot servos via Xbox 360 Kinect body joints with per-joint servo mapping, automatic degree calculation, smoothing and upper/lower control
Featured
Revive Omnibot 2000 with an ez-robot kit and L298N motor controller; add small servos for arms and test a 6V 5Ah gel battery.
question
Great Deal At Makershed The Dynamixel Xl-320 $6.49
I believe these are supported within ezrobot. The DYNAMIXEL XL-320 is a robot smart actuator with a fully integrated DC...
0
3 k
Chiefavc |
question
Rgb Ghosting?
Today I started work with my new robot parts, one of them being the RBG led array(JD's eyes). In the animator, I set one side to light up and the other not to, but for some reason the other side...
4
3 k
DJ Sures |
question
ARC And Go Pro
Hi, I noticed that the "No DLL's found in the waterfall procedure" has come back in the later versions if Go Pro is installed. Has this bug been reintroduced? I know that I can fix this issue by deleting files but I thought this had been fixed in the ARC software itself. Could somebody advise? Thank you and Happy Hoildays! Akhila
4
2 k
DJ Sures |
question
Please Help
My Ez robot six is not connecting to my phone or it will connect then will disconnect and my speaker has stopped working
3
2 k
DJ Sures |
question
Servo Causes Program To Freeze
I am doing speech and "robot move forward" and the servo runs but then I can't shut it using the servo control and the ez program keeps freezing on me. When this happens I get the message "I have successfully connected to your network" and why this is resetting, I have no clue. Anyone have any ideas? Also the program keeps...
4
2 k
Dunning-Kruger |
question
Controller Stuck In Client Mode
I unboxed a new hexapod kit yesterday. It was working fine until I switched from AP Mode to Client Mode. Now the controller is stuck in Client Mode and will not reset. (Note: Performance was herky-jerky in Client Mode, so I wanted to switch back to AP Mode where it ran smoother.) I have pressed the reset button on the controller but it does not...
8
3 k
vsljoe |
question
Specific Recommendation For Power Adapter
Hello, I made the leap after a fair amount of research and bought an ezbv4 last night. My initial application is static so I deferred...
30
8 k
Redzone |
question
Connecting An External Speaker To The Ez-B V4?
Hi, I wonder if it is possible to connect an external speaker to the ez-b v4? Maybe even a stereo speaker or 5.1 system?
6
3 k
Andy Roid |
question
Driving Stepper Motors With Ezb V4
Done a lot of looking on the forum and still can't figure it out. I am building a pretty heavy duty robot and want to use the power of stepper motors. Question is - how do I interface the stepper motor with the EZB? I have Kollmoren P22 stepper motor - 8 wires, capable of bipolar, unipolar and parallel operation. I guess I need a recommended drive...
4
3 k
castlephelps |
question
Connecting Leds To The Ez-B V4
Hi, I am just taking my first steps with my ez-b v4. I would like to connect some LEDs to the ez-b v4. Maybe some colorful ones that light permanently and an LED that can switch colors? (RGB-LED?) Which LEDs would be good for this little project? I already have a package with LEDs and resistors, but I am not sure if I can use them for this:...
10
4 k
sucipher |
question
Dc Motors For The Ez-B V4
i want to buy the ez-b v4 develepor kit to build a robot. but want to know if the ez-b v4 can handle dc motors. if it can't, how could you make it so it could?
4
2 k
dederdegamerta… |
question
Slow Performance
When I do a benchmark test of the Read 300 ADC I get a result of 5 reads per second. I know it use to be around 65. I thought it was because of the "Limited" WiFi message, but...
83
9 k
DJ Sures |