Robot Building Questions
Your robot can be more than a simple automated machine with the power of ARC Pro!
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Real-time servo position input via Arduino ADC over I2C; supports Nano (6 channels) or Mega (16), configurable I2C address and scalable chaining.
Featured
B9 Trendmasters RC toy hacked: chest LEDs, flashing circuits, rotating antenna sensors, EL voice plate, bubble LEDs, tread and arm upgrades.
question
Can Anyone Recommend Pla And Abs
I had a failure again last night because of a nozzle clog after 17 hours of printing. This was my second try at the same part. I have made three of these...
12
4 k
Andy Roid |
question
Set Port On Or Off
am trying to set a digital port d23 on or off set(D23,on) seems something missing here. i check cheet but it confuse me.
16
4 k
Nomad 6R |
question
Question Using Tablet Camera Using ARC
I having a problem using the camera on my Windows 8.1 tablet. I get this error: Object recognition initialized Error initializing Camera: System.Runtime.InteropServices.ComException (0x80004004):Error HRESULT E_FAIL has been returned from call to a COM component. I get the same error using either the front or rear facing camera...I have the latest...
33
7 k
thetechguru |
question
Omnibot 2000 Rubber Treads
I know this has been asked, but does anyone still make homemade treads for the Omnibot 2000? Mine needs it bad! I love everybody's work on the Omnibot 2000 and 5402!
1
3 k
MikeDC |
question
Having Questions Connecting ARC To Wifi
I can get the controller to connect to the wireless router but I can't seem to get ARC to connect to the controller. I get the following error report. Attempting connection on 192.168.1.1:23 Connection Failed: System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it 192.168.1.1:23...
2
2 k
thetechguru |
question
Meet Cy
This is Cy. He stands 4feet tall. Uses a Dell laptop for its head and to run the ezb software. As you can see has two arms and two wheeled drive system. Its been fun building and now starting the long task...
3
3 k
RoboHappy |
question
Moving Discrete Distances
Now that I have part of Wiggins (my robot arm's name) built with multiple motors and multiple sabertooth/kangaroos all of which are being driven by digital ports on EZ-B...
45
6 k
thetechguru |
question
New Plugin Idea Request - Encoder
Hi DJ, i think some kinde of encoder plugin would be great. There are basically to encoder types: optical or mechanical. What do you think?
3
3 k
CochranRobotic… |
question
Regarding Connection And Control
Hi, I'm Gilbert from india.I have bought ez controller for my graduation project.I have doubt that the controller can be connect directly to our pc through usb cable? My project is about quadcopter can we connect the brushless motor to our controller without the speed control module or we have to use it? I'm requesting the ez organization to upload...
11
3 k
fxrtst |
question
Safety Clip
i made a video about the safety clip for those who wants to extend the batt , charging connector.dont forget the endcap.
10
4 k
Nomad 6R |
question
New Object Learning With Script Possible?
Hi, i was trying to make a script where we use speach recognition and say for example: "Train new object", and show a new object to the camera and give it a name via voice, but cant finde any script comands to do that. Is it possible? Thanks. Paulo
6
3 k
Proteus |
question
Interested In Jd
Hi, my name is John and I'm new to the world of robotics. I do have basic programming knowledge. Ever since I was a little kid I wanted to build and program my own robot. When I discovered Ez-robot, I knew my dream could become reality. This project will be my first and I'm sure it won't be my last After doing a lot of research I finally made the...
5
2 k
Alan |