Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Execute scripts on WiFi/network connect or disconnect; monitor adapter, store status in a variable and trigger custom scripts for headless SBC...
Featured
Sync two JD robots' servos in real time with a Synthiam ARC script using PWM Servo Feedback to mirror positions over network.
question
Hasbro 2002 Interactive R2d2
I am desperate to find the antenna for the Hasbro interactive r2d2. Any ideas where I can try and resource one from?
1
2 k
DJ Sures |
question
How To
whats the best way to get jd standing on one leg. when i try lift the foot with one 1 degree it makes alot off sound, and these are brand new servo's.
6
3 k
Nomad 6R |
question
Creating Plug In
Hi, I posted this yesterday but did not show up for some reason. I am creating my first plug in. Followed the tutorial completely. I keep coming up with the same error constantly. CA0055...
20
6 k
DJ Sures |
question
Servo Power Source Questions
Hi, My first question is about whether or not its fine with 24 servos to twist all the red wires together and all the black wires together so you end up with 26 wires - 24 data + 2 power. I will use a 7.5V46A power supply to provide power to the servos. The data lines will hook into my EZBV4 Microprocessor. It seems like the obvious answer is 'of...
4
3 k
CochranRobotic… |
question
ARC For Windows W/ Lynxmotion Ssc32u
Hi All I'm Newbiee May we can use ARC For Windows to control LynxMotion SSC32U board via USB ? https://www.lynxmotion.com/p-1032-ssc-32u-usb-servo-controller.aspx @trongdung
2
2 k
TRONGDUNG |
question
Keep Gripper Closed While Moving
I added a gripper to the galapogos bot as a "horizonal servo" attatched to D23 and it is working fine. How do I keep the gripper closed while the robot is performing other actions like moving forward. Right now it seems to open up while performing any of the actions. I think I could create whole new frames/actions but I just want to know...
5
2 k
DJ Sures |
question
Are You Moving?
whats happening?
4
3 k
Wolfie |
question
Good News
i have been selected in inspire contest i have to make a project wait till 15 march because 10 exam will be over thankyou
1
3 k
Nomad 6R |
question
Adventure Robot Servo Calibration Profile Procedures?
I have an Adventure Robot on order but haven't received it yet, but I am researching into it on EX-Robot Site ahead of its arrival. I noticed in the application for the Adventure Robot that there is a Servo Calibration Profile for the wheel Servos. Have a few questions regarding this procedure: 1) What exactly are we calibrating. The only thing I...
6
3 k
DJ Sures |
question
Volume Sound To Low
hi how do i set the volume higher in a script.for the ezbv4.
26
7 k
Nomad 6R |
question
Pandora Bots Does Not Understand My Voice
pandora does not understand me please help stress stress
2
2 k
DJ Sures |
question
Jd Helps Me Clean Up
This is so cool must see he is helping me clean up the Jenga game pieces Jd is awesome Jd is pretty useful in cleaning up let me know what u guys think Jd is awesome Jd is awesome Jd is awesome Jd is awesome Jd is awesome Jd is awesome Jd is awesome Jd is awesome Jd is awesomeJd is awesome Jd is awesome Jd is awesome Jd is awesomeJd is awesomeJd is...
13
5 k
seromo |