Robot Building Questions
Harnessing the power of ARC Pro, your robot can be more than just a simple automated machine.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Waterproof Bluetooth Speaker
Add your soundtrack to robot building adventures, or add this to your robot! Introducing the Synthiam IPX6-certified...
Featured
Target Overlay
Display custom transparent PNG overlays on the camera control video output.
Featured
Darth Vader Humanoid Robot
I made this Darth Jader for an upcoming The Robot Program episode. Wanted to share the robot exclusively with the ez-robot forum before the...
question
Personality Generator Broke After Merging Projects
I merged a bunch of controls from one project to my main project. Ever since then Ive been having trouble with my personality generator. It will run a few times and then it wont run any of its scripts. It will try to cycle through them but after that each time it tries to launch one it will throw an error. Heres what Im getting in the debug window...
5
3 k
Dave Schulpius |
question
Fastest Way To Bring Omnibot 2000 Back To Life With Ez Robot?
I have an Omnibot 2000 that Id like to try to bring to life with EZ Robot. I can see that several...
2
2 k
jstarne1 |
question
Servo Controlled Camera Question
Just a quick question: Im having an issue with the face tracking in that if a face moves off screen too quickly, it is, of course, lost. It would seem...
21
4 k
Mac |
question
Irobot Update
For those of you who have been following my build, I added a micro-servo to the EZB camera for up-down tracking. Now it self-adjusts for people of different heights. And it tracks...
2
2 k
Mac |
question
Sound Activated Circuit - Pc Vs. Ezb
I followed the tutorial to make the LED flash when my robot speaks. I noticed that if I have it set to the PC Speaker, the LED flashes in sync with the speaking but if I switch to the EzB, the flashing is not in sync and ends way before the talking completes. I am using the code from the tutorial (see below). # Sound Servo to PWM range Script #...
0
2 k
dbeard |
question
Connection Chime
Heya guys. Anyone know if its possible to disable, remove, or replace the i have successfully connected to your network chime from the connection startup?
5
2 k
WilliamK |
question
Servo Question
I have assembled my JD Humanoid Robot. When I connect to him, one of the servos makes a buzzing sound and wont stop unless I turn it off. For instance, the servo was the upper part of the left...
9
2 k
drebant |
question
Cant Configure Rovi As A Wifi Ap
We are trying to reconfigure the Rovi to be a Wifi AP. We can connect to the Rovi via my router, we can access the Rovis configure pages, both from my PC and my tablette, we can apparently save the EZ-B Wi-Fi Access Point Mode Configuration, we then reboot the Rovi, either using its power switch or the reboot option from its Diagnostic section, but...
10
3 k
DJ Sures |
question
2S Lipo Vs Servo
First I like to say that im very happy with your products But here we go A fully charged lipo puts out 8.2 volts and the servos that are in the kits can have max 7.4 volts. I used in my projects cheap towerpro 995 servos and a stepdown regulator to put out max 6 volts because if i put the full lipo voltage on them they begin to smell funny and...
2
2 k
ed_eilers |
question
Hb25- Initialzing Via A Power Cycle
I have had a little issue with using the Parallaz HB25 motor controllers I use with Cy. Maybe someone could shed some light on this. It would seem...
18
4 k
ptp |
question
Revolution Jd Connection Questions
Hello, I recently got a F-31 Revolution JD robot kit. I put the kit together and verified all the servos are connected to the correct ports on the...
6
2 k
jglavin |
question
Camera Grid Lines
I find when using the Camera, the grid lines change or fail to stay as set. I try to save the set locations of the lines, but when I reload the project I have to reset the grids again. Thanks, Ron
16
4 k
Andy Roid |