Robot Building Questions
Join the ARC Pro community and gain access to a wealth of resources and support, ensuring your robot's success.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Bridge ARC to Lynxmotion SSC-32: maps V0-V31 to SSC-32 channels for reliable, high-performance serial control via USB, EZB/Arduino UART.
Featured
Cookie Monster robot showcases EZ-B voice recognition and speech synthesis with dynamic phrase-triggered commands and rapid prototyping
question
Check The Arms Like An Excavator
If I control the arms with the Servopad, everything is too rude for me. Has anyone ever driven an excavator? If you move the joystick slightly in one direction, The arm moves continuously slowly in the direction. If you move the joystick strongly in one direction, The arm moves continuously rapidly in one direction. For my robot I would like...
14
4 k
Stiko |
question
Io Tiny Ip Connection Questions
I have the IoTiny board, my bluetooth connection is good, but when I try (Yes, I've tried all the com ports as well) the connection fails and times out. When...
5
3 k
Dunning-Kruger |
question
Omnibot 5402 - Belts
Saw a few posts about Omnibots here, joined the site hoping for some help. Just put a battery in my old Omnibot... has been on a shelf since the late '80s. Turned it on, went to test the tape deck and the motor turns without a tape, but with a tape it doesn't. I suspect a slipping belt issue. Anyone know what belt I need for the deck on this?...
7
3 k
THRobinson |
question
Small Headset Mic Suggestions Needed
Hello Everyone, I am looking for a small wireless headset mic with a mute function for when I am using voice control with my R2D2 in a crowded room or convention. Does anyone have an good suggestions? For some reason I am not having any luck in my search; they either don't have a mute button or are designed to work with a cellphone. Any help is...
5
2 k
dbickert |
question
ARC Error At Loading Of Ippsp Libarary
EZ-Builder opens ok, Select a project and the error "Error at loading of ippSP Libarary", and Comment "No DLLs were found in the Waterfall Procedure" pops up and ARC freezes and the closes. Did a complete uninstall, downloaded fresh copy of latest version and the problem still persists. Help appreciated?
4
3 k
DJ Sures |
question
Can I Connect A Microphone To Ezb
Hello everyone I tried to find some information in the forum, but my search was unsuccessful. I have also found no tutorial. I would like to use my robot in other rooms and in the garden. I would like to hear what happened there. Voice control does not have to be. I just want to hear what's going on in the area when the motors are not running. I...
8
3 k
robo rad |
question
Ultrasonic Device
I can not get the ultrasonic device to detect an object, (wall ect). I have the ultrasonic device connect to trigger D21 echo D22 and even tried to swapping the trigger with the echo. If I look at the radar the distance is always 255. and I see two red spots that I think are the end points. I removed the device from the servo and tried not moving...
2
2 k
geosmith41 |
question
How To Add Leg Servos To Jd And Get Them To Show Up In The Design Pictures
I'm trying to add two more leg servo's to jd . I can add the servo box in the motion control panel but I can't find any way to add the new servo's to the design picture, or how to get the new servo ports in the port lists ?
6
2 k
thetechguru |
question
Auto Release Control
It probably is a simple change to make the Servo Dropdown list on the Auto Release control so the user may Select Multiple servos at once. A user friendly change... <select...
2
2 k
mayaway |
question
Recent ARC Update
I just updated the ARC windows software because the message popped out that there was an updated version. Then after it said windows 7 is no longer supported but may still load and should upgrade to windows 10. That is not really an option for me now,Prefer my win 7.Is this going to be a problem for all the cool plug in programs I want to start...
9
3 k
robo rad |
question
Ideas For Plastic Outer Cover For Max
I need to get outer plastic body for Max to cover all the internal parts and make him cool. Does anyone have any suggestions? https://youtu.be/EdNz9cD2uAc
4
2 k
Ellis |
question
Reading Mpu9150 From Python
Hi all, Is there a way to get sensor readings from an MPU9150 directly in Python? I've tried writing its values to a file and then reading from that file as it's being written into (to develop a live interface), but that crashes when both ARC and Python are trying to access the same file at once. Python was able to get the camera image data just...
5
2 k
ptp |