Robot Building Questions
ARC Pro is more than a tool; it's a creative playground for robot enthusiasts, where you can turn your wildest ideas into reality.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
ARC UI for onboard computers to control NeoPixel rings via serial: test/run patterns, preview and copy Arduino serial commands, includes sample code.
Featured
Upgrade RoboPhilo Junior with EZ-Robot EZ-B and camera for WiiMote accelerometer control, vision tracking and AutoPosition support for humanoids/hexapods
question
Microsoft Cognitive Vision Speaking French
Hi, I'm from France. I've tested the Microsoft Cognitive VIsion, it works well, but only with an english description. How can I configure ARC or the plugin to have french answers ? Thanks for your step by step answer, and sorry for my english ! Regards Stephan
10
3 k
Jlucben |
question
H Bridge
Hey everyone, I have been trying to get my H bridge to move both of my 12 Volt DC motors. They moved a little bit at one point with the control movement panel and a script and when I test them directly to...
9
3 k
Nomad 6R |
question
Where Can I Find An Ez-B V4 I2c Peripheral Cable Longer Than 25 Cm?
I am building a 6" tall robot out of old Robotix parts and EZ Robot parts. I need a peripheral cable longer than the 25 cm one offered. Maybe 60 cm or so. Where would I find this, or do I have to just extend the cable by hand with individual wires?
5
2 k
larrypiters |
question
Connecting The Ln Motor Board
hi i read this tutorial,i wanna connect motor board with 1pwm. witsh port do i use to set the pwm ? and where does the power come from to power the motor board ?...
6
3 k
Nomad 6R |
question
Servo Question
One of my servos just started to hesitate and move as far back as possible. I changed its location on the robot to see if it was the connection or the servo - the same servo still did this....
1
2 k
Dunning-Kruger |
question
Long Wires Use
does the use of long wires drain the batterie ? i have two new batt drain fast and charge fast.
4
3 k
Nomad 6R |
question
Rgb Animations - Turning It Off?
I'm back to experimenting with my standard JD and having a lot of fun with the RGB animations, but when I "stop" an animation JDs eyes stay stuck on his last animation screen so the LEDs no longer change but they don't go back to blank like I would like them to. I'd like to set his eyes to a blank all off state. Can I do that? I tried to...
11
4 k
Dunning-Kruger |
question
Image From Radar Window
i use an ping sensor with the radar window.do i cant see the red line, it makes ,just a chort piece.is this correct ? also can i use 4 ping sensors in one project ? thanks...
2
3 k
Nomad 6R |
question
Jx Pdi-6221Mg
Hi all new here im new to ezrobot and more used to arduino my question is will the EZ-B V4 controller run the JX PDI-6221MG servos? as they are 330hz and arduino servo.h cant run them. so looking at jumping on board with the ezrobot crew. many thanks for any advice.
2
2 k
phil196 |
question
Wire Wraps
If you ever lose a wire wrap, you can make your own with Mordie's easy instructions: https://youtu.be/fGts3x4-yS4
7
2 k
JustinRatliff |
question
Jd Sees Me
i finally found the face recognition.lots of fun.
1
3 k
DJ Sures |
question
Make Your Robot Follow You
hey, I am building a robot for the world makerfaire @ NY. and I cameup with tht idea of making my robot follow me, but i dont really know how to make it. Does anyone knows?
18
6 k
JustinRatliff |