Robot Building Questions
Don't limit your robot's potential – subscribe to ARC Pro and transform it into a dynamic, intelligent machine.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Robot Sticker
People know your robot is capable when they see it is powered by Synthiam. These stickers are heavy duty for both indoor...
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Convert text to dynamic, real-time speech with nine expressive OpenAI voices-natural, varied, accessible robot communication.
Featured
Dirgebot: 3 ft 4 in kid-friendly robot prototype with V3 board, webcam and W3 Iconia; seeking Synthiam ARC programmer for programming and production
question
Empty House?
Is the building usually empty now?
1
2 k
DJ Sures |
question
Lipo Battery Lead Protector. Makes It Easier To Unplug After Charging
At times I have struggled with trying to disconnect the small JST-XH charging...
3
3 k
faengelm |
question
My New Robot
I wish! Boston Dynamics Robot
0
3 k
dbeard |
question
Ez-B V4 Magic Smoke
Hi, I bought a DIY kit from Hobbyking. I planned to buy a EZ-Robot kit for a while and for that price, I could not resist any longer. I had my doubts if it was really a genuine kit, but everything looked legit. I build a small two wheeled robot with it to get familiar with ARC etc. I provide power to the EZ-B V4 with a 2s lipo. Everything was...
3
2 k
Jeremie |
question
Import/ Export Utilities Troubleshoot
Dear EZ-Robot Friends :-) I want to use the Import/ Export Utilities for the Auto-Position. I use Windows 10, installed the newest ARC. The problem: I can produce an Export-File (Servo Profile Auto Position) but If I import this Data, all is fully visible but nothing is working and there comes a error message: Auto Position Thread Error:...
1
2 k
Smarty |
question
Connectivity
I am trying to get technical support for my ez bot robots. Technical support sends me online. I have been online trying to figure this out but no luck. I have JD , six, and revolution. I can not get JD to connect to Wifi. I have uninstalled the antivirus software as suggested, have rebooted, their is no red light shown? on the power pack. my voice...
3
2 k
DJ Sures |
question
Is Bing Speech Rec Still Free?
I received an email saying my azure account has been cancelled unless I pay after the trial period has ended. The plugin has stopped working for me. I thought this was a free service if you kept under a cap or something which I definitely have. Anyone else experiencing this?
9
3 k
Perry_S |
question
Reading Values From Imu Mpu6050 6Dof
Hello everyone, I had been trying for some time now and have finally come up with a code for taking values from the IMU. @DJ here it goes; I would...
15
10 k
thetechguru |
question
Inmoov Battery Question
Hello fellow Ez-Robot Users, I am in need of some help, I have been building my Inmoov for several months when I have the time and came across this issue. I first had a e-fuel power supply 12v at 30a which I found out very quickly that it was too powerful to power my ezb4's (two that I have). I now have a 6v 50a power supply. When I connect to the...
14
5 k
cem |
question
Servo Movement At Power Up Before Initialization
When running my servo initialization in the connection script I am able to set position and speed just fine. I noticed that...
25
17 k
Dave Schulpius |
question
Setting Servo Speed For An Auto Position
Hello everyone. I am looking for some scripting help. I would like to set a servo speed, or even better, an incremental servo speed to all the servos in the auto position selections I use in a script. Instead of adjust speed for each servo individually. Is this possible? I am using 2 auto positions from 2 boards. The reason I would like this is...
8
3 k
3dGuy |
question
Mobile Connection Init Script?
In the desktop connection control I have set the initial position and speed for servos in a connection script But, in the mobile interface I don’t see a way to do this in the connection control Anyone have an idea of how to have a script run upon connection on a mobile device? Thanks, Frank
1
3 k
DJ Sures |