All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Control LewanSoul LX-16A servos via ARC (EZ-B v4/IoTiny): assign virtual ports, read positions, set speeds, and enable continuous rotation.
Featured
Convert a Shark Steam Spray Mop into an EZ-Robot Steam Spray Mop-DIY robotics upgrade inspired by Team DJ
question
Wifi Connection Question
I have used my JD robot with my Android device without issue in the past, but today when I make the connection to the EZ-B wifi and enter the IP address 192.168.1.1:23 I...
2
3 k
DivideWorks |
robot
Xaqmusic's Dear DJ And Team,I Started
CM1k ASIC + EZ-B v5: microsecond pattern recognition (256k input, 1024 neurons), ~300x CPU speed, ideal for teachable EZ-Builder robot ML
0
2 k
xaqmusic |
question
Servo Recorder Error
I just downloaded the 7/17 release and my servo recorder is broke. It might have been broke before i updated but unsure. I did notice its located in two places servo/and plugins?!...
2
3 k
fxrtst |
question
Backlight Lcd Project Omnibot 2000 Robot
Hello, everyone, I saw on the forum that it was possible to backlight the LCD screen of a Omnibot 2000, so I disassemble my robot Omnibot 2000 to access the LCD screenshot, but I do not see how I can do ? quelquin can you give me information on the subject (in French if possible), has cordially thank you eric
0
2 k
bernard eric |
question
Script For Robot's Age
I know this topic came up once or twice before to script a method so your robot could know it's age. I first scripted a process in PowerShell to come up with the exact age from a given birthday for your robot, but I wanted to script it in ARC and I didn't want to make a plug in (I know that idea got tossed around before). I just wanted something...
4
3 k
JustinRatliff |
robot
Cryptid7's My Robot Idea Is A Hexapod Wit
Hexapod with two 3-servo grippers and a rotating camera for exploration.
0
2 k
cryptid7 |
question
Connection Questions
am having problems connecting to v4 keep getting this report Quote:21/03/2015 15:22 - Attempting connection on 192.168.1.1:23 21/03/2015 15:22 - Connected to 192.168.1.1:23...
18
5 k
DJ Sures |
robot
Iamshazam's I Plan On Making An Autonomous
Autonomous floor-mapping robot using iCreate and EZ-B hacked robot components
0
811
iamshazam |
robot
Nemdez's JD Humanoid, Could Put The Ult
JD Humanoid foot-mounted ultrasonic sensors for detecting and avoiding obstacles
0
2 k
Nemdez |
question
ARC On Raspberry Pi With Windows 10
Hey :-) Is it possible tu run ARC on a raspberry pi (2) with windows 10?
10
5 k
preetyjess01 |
question
Ez-B Client Mode And Router Conflicts
My problem is when I connect EZ-B in client mode my wife's WiFi connection goes down. @thetechguru stated in thread: https://synthiam.com/Community/Questions/7722 post #5 that: Quote:Although connecting in Client Mode, where the EZ-B connects to your router is probably best, the issue you are probably having is an IP subnet conflict in the wired...
8
4 k
thetechguru |
question
Ez-B V3 Will Not Connect Since Update And New Computer
I use COM3 and it gives the following message (This device is not an EZ-B). Please follow the online tutorials...
6
3 k
DJ Sures |