All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Local MQTT broker for ARC: host pub/sub messaging on TCP port 1883, relay topics between publisher and subscriber clients.
Featured
SUKI 6-DOF biped uses inverse kinematics, IMU for future balance, blob-based ball tracking, gait sequences with dampers to mitigate actuator...
question
Ezb V4 Injection Molded Shell
Will EZ Robot be offering a EZB V4 hard case cover in the store? I do remember seeing one on DJ's parts video a few weeks ago. I'd like to replace the 3d printed one that came with my v4. If so, any idea what they will cost?
8
4 k
Dave Schulpius |
question
Browser Script Command
I can open a web page with the script command ... Browser("000.000.000.000"). How do I get the browser to close when I want it too through a script command?
6
2 k
DJ Sures |
question
Questions With Rotational Servo Speed On Adventure Bot
When I load the example project, I get an Auto Position Control that includes directional arrows. However, when...
12
4 k
faengelm |
question
Initial Feedback On The Iotiny
@DJ.... Received my iotiny's today and wanted to say they are simply awesome.... Another great innovation from ez robot.... And upgrading the firmware was absolutely seamless.... Can't believe you tucked all that tech in such a small package.... Can't wait for more products from ez robot.... EDIT @Jeremie credit goes to you too... Thanks for not...
5
3 k
Dunning-Kruger |
question
Ez-B V4 Uart To Usb
I finally upgraded my old EZ-B V3 to the latest EZ-B V4 In my old setup, I connected to the EZB using a USB to TTL adapter that was connected thru the UART port. Can I do the same thing with the EZB4 UART port?
14
4 k
DJ Sures |
Navigation
Wavefront v2
Wavefront grid planner computes collision-free, deterministic paths from start to goal using known occupancy maps for indoor robots.
0
82 k
question
Stability Of The Servo And The Body Of Jd
JD gave me too few possibilities of movement. So I would extend it by some servos. I am afraid of the stability of the servo and the body....
4
3 k
DJ Sures |
release
Release 2016.11.19.00
Camera vision movement tracking: speed-controlled camera turns and forward motion, configurable movement-delay checkbox and hover-help
2
4 k
DJ Sures |
question
Inmoov's Eyes
What cameras have people used for the robot project INMOOV'S eyes.
11
5 k
WilliamK |
question
Information
Hello, I have a V3 board can I work with the New software ? If yes = cool If no. = what are my option ? Thanks Michel Laganiere ( hold customer oh you )
4
2 k
DJ Sures |
question
Camera Stop Doesn't Work In C# Sdk
Hi I'm having some problems stopping the webcam using the C# SDK. StopCamera() method doesn't work and camera is still active. I need to kill the iis express process to make it stop. My current code that is not working is this: Camera.StopCamera(); Camera.OnNewFrame -= Camera_OnNewFrame; Camera.Dispose(); Camera = null; Ezb.Disconnect();
7
4 k
DJ Sures |
question
Servo Mosfet Replacement
I have two servos which have blown mosfets in spite of my careful use. Does anybody know the identity of these. I would like to try and repair them rather than let them go in the "for spares" drawer.
0
2 k
westies |